I may have found the problem. I know it showed 100 percent throttle in the datalog, but out of curiosity, I ran another datalog, making sure all parameters were correct. I ran it on 4s just to see. Max throttle was 56%. Then I changed the throttle travel on my transmitter from 100% to 150% (remembering some people had this issue). Then I ran another data log. Current was lower, it got full throttle and max rpm's was 29625rpm . That's right in line with what it's supposed to be. Voltage at that point was 15.8v x 1860kv equals 29,388rpm which is almost right on the money. Hopefully this was the issue.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Bookmarks