Volume order for tp 3630 1950

[LiPo Power]

Mr Peterson, PayPal money sent for motor and cooler, Thank You very much....
( I was waiting for Doby to pay first... :-) )
Oh Yeah, and where is my motor ????? :-)

[DPeterson]

Doby and Lipo Power - paypal recieved - thank you.

If you don't mind fresh black paint over gold I can get you these motors sooner. :)

Just have 80mac and grayhamby left for paypal.

Doug

[80mac]

I resent the money last night and also sent you a pm that I sent it. When I checked my PayPal it said it was waiting for you to accept the payment.

[grayhamby]

Mr. Peterson--I resent payment as 80mac did and got a message-Payment pending-waiting for you to accept and that your email was unregistered. See my PM this am. GRH

[RandyatBBY]

I want one of these motors but funds are still tight. If you have a extra when you get in the order that would be great. Special deal for a retired old man????

[DPeterson]

grayhamby paypal showed up. Still nothing from 80mac. Don't panic. We got time and I will get you in on the order.

Like I said I bought a new computer and was without mine for 3 days for the data transfer. Then once I got them both back my IT director (my wife) had to reset all my e-mail settings, printer drivers etc. etc. What a pain in the a$$. Now I am traveling with and using my old computer because my new one has issues. Doby's right, damm spec computers.

I went all over my paypal looking for where to acknowledge payments. That page or button doesn't exist. Help please. I know grayhamby cancelled and resent once or twice. Anyway don't panic. We'll get it done.

Randy - I'll slip your name on one. We'll work it out.

Doug

[80mac]

I cancelled it for a second time, I will try again later tonight so send it through. I am sending it for goods and services if it matters.

Bill

[RandyatBBY]

Thanks Doug

[ray schrauwen]

I should be good right Doug? Hope so, I just sold a pair of gold motors... :) I still have one in my LSH I'll test against this unit.

[80mac]

Doug, I sent it over again a third time. Let me know if you get it.

[RCBoaterGuy]

Sent my pymt - Monday January 5, 2015 at 10:02pm

Goods & Services using a debit card -- went through without a hitch, not sure why others are having issues

My2C

[DPeterson]

80mac. Still nothing. When I get back to my office Friday afternoon I will get paypal on the phone. There has to be a glitch somewhere on my end due to my computer switching around. I am going to want this fixed.

Your good Ray.

The full order will go in on Monday. I think this one is around 30 or so.

Doug

[80mac]

Doug, This is what I keep getting each time I try and send you money. PP unclaimed status.jpg

[LiPo Power]

Call PayPal and see what they will tell you reg this issue....

Doug, This is what I keep getting each time I try and send you money. PP unclaimed status.jpg

[ray schrauwen]

It takes a while to get a human, so get comfy, speaker phone helps. Once you get them, they'll sort it out. Most likely you were flagged as a cheese throwing terrorist, taking donations everywhere to assist in your plan of Spec boat domination.

Hasn't a man in black from the NSA knocked on your door yet?

[ray schrauwen]

I miss Alan Nayman...

[jaike5]

It's dairymasters ..... you need the S in there at the end of master.
Cheers, Jay.
Go Packers. I've gotta cheese head, and much packer stuff. cowboys are going to have to deal with Clay Mathews and company....

[80mac]

It's dairymasters ..... you need the S in there at the end of master.
Cheers, Jay.
Go Packers. I've gotta cheese head, and much packer stuff. cowboys are going to have to deal with Clay Mathews and company....

Thanks for pointing that out, I used the address that Doug listed in post #36 and there is no "s" but I see it now in post #56. I will try again.

[DPeterson]

Oh crap. 80mac and others. yes its dairymasters with the s on the end. gosh darn crap noids. My bad. Thanks Jay - that had to be the problem.

[photohoward1]

Put me on the list please. 2 Motors no coolers....What is the Paypal?

[Doby]

Oh crap. 80mac and others. yes its dairymasters with the s on the end. gosh darn crap noids. My bad. Thanks Jay - that had to be the problem.

Sucks getting old!

[80mac]

Oh crap. 80mac and others. yes its dairymasters with the s on the end. gosh darn crap noids. My bad. Thanks Jay - that had to be the problem.

the payment has been sent, this time with no issues

[DPeterson]

80mac - Hallaluaha. It worked.

Howard - You going to make me type it again. You are brave. dairymasters@tds.net

They say you are as old as you feel. Yup - they are right.

According to ESPN - Cowboys are favored. Whatever!

Doug

[LiPo Power]

Here you go:

dairymasters@tds.net

Put me on the list please. 2 Motors no coolers....What is the Paypal?

[DPeterson]

Just placed the TP motor order. Full order this round is 33.

This will be my last. OSE will now be carrying the motor.

Will keep you all updated as we go with the order.

Doug

[RCBoaterGuy]

Did some searching on the net & finally found these motors... http://www.tppowerusa.com/motors/bui...series/tp-3630 - sure hope Doug chose the 5mm shaft with flat spot options wish I would've asked - Have bout 3 or 4 of these on hand... http://www.offshoreelectrics.com/pro...ct-ocfhe5mm15S

Here's a chart with specs... http://www.tppowerusa.com/motors/bui...series/tp-3630 - the 1950's are at the bottom - Winds=10D, Max Amps=57, Max Volts=31

Info on the coolers... http://www.tppowerusa.com/accessorie...rcooling/cj36l

Just placed the TP motor order. Full order this round is 33.

This will be my last. OSE will now be carrying the motor.

Will keep you all updated as we go with the order.

Doug

[Doby]

That's what we are getting...just like the 1st round.

[DPeterson]

Yep - all motors will have the 5mm shaft and flat spot. As for the max amps - that's the problem with manufacturer specs - can't use them. Already hit some motors with way more amps in our testing.

Doug

[RCBoaterGuy]

That's what we are getting...just like the 1st round.

Wasn't a member when the 1st round was done, sorry. - Original plan was to put a "gold can" in my IM31; saw these motors & changed plans. You (& most others on this forum) seem to know about those "gold cans" so I won't beat a dead horse.

Yep - all motors will have the 5mm shaft and flat spot. As for the max amps - that's the problem with manufacturer specs - can't use them. Already hit some motors with way more amps in our testing.

Doug

Yep - all motors will have the 5mm shaft and flat spot...
Thanks Doug - preciate the update.

As for the max amps - that's the problem with manufacturer specs - can't use them...

1. Well, guess that explains why you recommended a 120A ESC minimum - I'm going 180A, 4s only & will prop accordingly, that should keep me out of trouble.

2. Does that apply to most (all) brushless motors?? Or just marine applications??

Thanks

[DPeterson]

RCBoaterGuy - you will be very happy with the quality of the TP motor versus the 2030. Really not even in the same league.

As for your question No. 2 I can't answer that. I do not know. My only other motor experience is with the Lehner motors. IMO the BMW of motors.

Doug