swordfish rev limits?

[Thomas Schlarb]

Ok so I'm look to run my lenher motor i just got but i know these turn very high RPMs (50,000) I've got a couple swordfish ESCs and don"t know what if any rev limits? Don't know what to go with. i also have a Phoenix ice lite 200... any suggestions?

[oscarel]

Are you planning on running the lehner at 50k rpms?

[Michlee]

Ok so I'm look to run my lenher motor i just got but i know these turn very high RPMs (50,000) I've got a couple swordfish ESCs and don"t know what if any rev limits? Don't know what to go with. i also have a Phoenix ice lite 200... any suggestions?

what's the magnetic poles number of the Lenher motor you will run? And what model Swordfish ESC you will use?

[Thomas Schlarb]

It's a 2 pole motor. And I have all the swordfish ESC's

[jcald2000]

2 pole + 120,000 rpm and 4 pole = 60,000 rpm MAX.

[Thomas Schlarb]

2 pole + 120,000 rpm and 4 pole = 60,000 rpm MAX.

With all the swordfish ESC's?

[Michlee]

It's a 2 pole motor. And I have all the swordfish ESC's

Hi Thomas, yes, Swordfish ESC can work with the lehner motor.