Page 1 of 2 12 LastLast
Results 1 to 30 of 38

Thread: Parallel Connectors Custom made by me, back by request!

  1. #1
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default Parallel Connectors Custom made by me, back by request!

    I made some of these a month ago and they sold in less than 24 hours, plus members asked me to make some for them and "more" in general.

    These connectors are made with BRAND NEW WIRE, quality 10g 200c.

    New colorful shrink and you can have me make these for you and you choose colors!

    New Gold Bullets and quality solder, no desoldering these during a run!!


    AVAILABLE NOW:

    Pricing as follows,you recieve a "set".........2 pieces



    5.5mm to 5.5mm $8.50

    8mm to 5.5mm $9.50

    8mm to 8mm (10awg wire) $11.00

    8mm to 8mm (8awg wire) $12.00

    If you order you can receive TWO 5.5 to 5.5 for $15.00

    or TWO 8 to 5.5 for $17.00

    or TWO 8 to 8 for $20


    Ships to Continental U.S. for $3.99, I will take Money orders or Paypal and I absorb fees. I will not be putting tracking on Domestic mail that contains inexpensive items, if you want it its extra ($1)

    Thanks
    Attached Images Attached Images
    Last edited by Make-a-Wake; 01-18-2015 at 07:00 PM.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  2. #2
    Join Date
    Jan 2013
    Location
    nc
    Posts
    198

    Default

    I'll take two 8mm to 8mm for $20.
    Thanks Sean

  3. #3
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Quote Originally Posted by Sean View Post
    I'll take two 8mm to 8mm for $20.
    Thanks Sean
    OK, thanks, I need to make those as I havent 'built' any 8 to 8's yet but no problem, should be a few days as i have 8mm's en route to me right now. You can PP me at your leisure at: cschockmd@yahoo.com $23 with shipping

    Thanks Sean.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  4. #4
    Join Date
    Jan 2013
    Location
    nc
    Posts
    198

    Default

    Funds sent. Thanks Sean

  5. #5
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Got it, as soon as the 8mm bullets arrive i will get them out!!
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  6. #6
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    All four sets are still available, I will be offering more "completed" sets as I need to stay within guidelines. The items pictured are the actual completed items for sale by number in pics.

    These are built very well with 10g wire and quality solder.

    YOu may need some for your anticipation of "Spring running"!!
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  7. #7
    Join Date
    Sep 2012
    Location
    Ia
    Posts
    535

    Default

    i'll take 2x of the 5,5 to 5,5 for 15 $ right ? ok sent u 20 by PP thank you.Darryl
    Last edited by darryl whitman; 12-28-2014 at 01:54 PM.

  8. #8
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Thanks Darryl, i will get them out to you quickly! Appreciate your 'busines'!
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  9. #9
    Join Date
    Sep 2009
    Location
    FL
    Posts
    1,535

    Default

    would you make some 8mm anti spark connectors ?

  10. #10
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Hi, lemme do a small bit of research on them, i have had them before and need to freshen up, i will sure try, i will let you know.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  11. #11
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    There is still one of the 5mm to 5mm connectors left on this sale thread and the 8mm to 5mm.

    I am being told that I can link my individual sale threads to my unique services thread where qustions and requests can be made. So per the mods, please either pm me or ask questions not related to the sale of these items posted here on the unique service thread I will create.

    Thanks!!
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  12. #12
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Quote Originally Posted by Sean View Post
    I'll take two 8mm to 8mm for $20.
    Thanks Sean
    Sent
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  13. #13
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Service still avaialable
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  14. #14
    Join Date
    Sep 2012
    Location
    Ia
    Posts
    535

    Default

    guys these right fine, nice work man A+++ on service

  15. #15
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Thanks Darryl, I guess you ran them huh?
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  16. #16
    Join Date
    Jun 2012
    Location
    CO
    Posts
    118

    Default

    I need two sets of the 5.5 to 5.5 for a total of 30.00 +4.00 for shipping. Can you confirm you have these available before I send $$$$

    Robert

  17. #17
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    You actually get two sets for $15, which each set is one pos and one neg connector, so you will have a total of 2 pos and 2 neg connectors, 4 pieces total for $15 plus shipping if that's what you need, thanks!!
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  18. #18
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Hey Rookie, i think i see Ppal money from you, right? Lets make sure I know exactly what you want.

    This picture is a "Set"................so you want FOUR sets?
    Attached Images Attached Images
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  19. #19
    Join Date
    Jun 2012
    Location
    CO
    Posts
    118

    Default

    Quote Originally Posted by Make-a-Wake View Post
    Hey Rookie, i think i see Ppal money from you, right? Lets make sure I know exactly what you want.

    This picture is a "Set"................so you want FOUR sets?

    CORRECT and Thanks

  20. #20
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Ok gotcha, I wanted to be perfectly clear, thanks for choosing my "service".
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  21. #21
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Quote Originally Posted by Rookieboater View Post
    CORRECT and Thanks
    Sent out today!!
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  22. #22
    Join Date
    Apr 2015
    Location
    FL
    Posts
    40

    Default

    Hey I'm new to this so I just wanted to ask. I am getting a leopard motor and a 180 esc what do you recommend for connections? Is 5.5 enough all the way around. I want to run them parallel. Not sure how to wire everything up so any help is appreciated. Thx

  23. #23
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    5.5 from the batts is fine for parallel connetions, I would suggest 8mm at the ESC power connections.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  24. #24
    Join Date
    Apr 2015
    Location
    FL
    Posts
    40

    Default

    So what would I need then 4 5.5s for the batteries and 2 8s for the esc? Do you have any pics of the parallel wires you make?

  25. #25
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    The pics are in post #1, and yes 4 x 5.5's and 2 x 8's.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  26. #26
    Join Date
    Apr 2015
    Location
    FL
    Posts
    40

    Default

    How do you hook up the batteries with this? Sorry new to this. Thx bro

  27. #27
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Each battery goes to one side of each parallel connector, then the single end of the parallel connector goes to the ESC.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

  28. #28
    Join Date
    Apr 2015
    Location
    FL
    Posts
    40

    Default

    So I would need 2 of these harnesses? Do you have a pic How it's wired?

  29. #29
    Join Date
    Apr 2015
    Location
    FL
    Posts
    40

    Default

    The way the boat now is in series I guess? The way it comes to run 6s Is that better than parallel

  30. #30
    Join Date
    Apr 2015
    Location
    FL
    Posts
    40

    Default

    So I would need 2 of these harnesses? Do you have a pic How it's wired?

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •