SeaKing 130 HV Programming, need your thoughts

[msundsd5]

OSE Fam,

I have the SeaKing 130HV V2 and a V3 Marine ESC and when I try to use the program box that is used for the Seaking 180 ( old and new version ) it will not work. The LCD lights don't light up to program the ESC. Is there another programming box for the HV esc? It says in every description that you should be able to use the same programming box for all the SeaKing 30-180 amp versions 2 / 3 . It works fine on every Seaking esc I have except the 130HV version 2 & 3.

Any thoughts?

[montymike]

Are u using a batt. To power it up rhe 130hv does not have
A bec. that box will work on the old as well as the new
Escs.. U have to power the box with a separate radio battery.

[msundsd5]

Are u using a batt. To power it up rhe 130hv does not have
A bec. that box will work on the old as well as the new
Escs.. U have to power the box with a separate radio battery.

You are the *&$&#&&#&# man....... I'm hype now....... LOL.... Thanks, I was using a receiver pack to plug directly into the receiver and the batteries to the ESC while connecting ( needless to say that didn't work even though I thought it would be the same thing). When I just plugged up the batteries to the esc to power it on, plugged esc into box, and then plugged receiver pack directly into the program box it worked!!!!! YAY, no more reverse now....... HA HAAAAAAAAA . THANKS SIR!!!!

[montymike]

Glad i could help