Page 1 of 2 12 LastLast
Results 1 to 30 of 54

Thread: Unlimeted Hydroplane CT 10 by cervelo and CT 13 by mudl

  1. #1
    Join Date
    Aug 2008
    Location
    By
    Posts
    159

    Default Unlimeted Hydroplane CT 10 by cervelo and CT 13 by mudl

    Hello

    my friend Christian (cervelo) an i want you to show our new Boats.

    We built a 1:6 Unlimited Hydroplane with electric power.

    I start with my boat.

    Unlimeted Hydroplane CT 13 in 1:6 size from Chris Tonn.
    The Hydro is 150 zentimeter long and 72 zentimeters wide.
    It is powerd by two electric Motors

    Setup:

    2x TP 5850 - 820
    Motors are rebuilt with aktive aircooling
    2x Wunderlich 200 Amps Esc
    12s1P Lipo Turnigy A-Spec 5000maH per motor
    Props at the moment 61 mm 2 Blade Steelprops with 1,25 Pitch.

    Here some Photos

    bye
    mudl














    Last edited by mudl; 10-19-2014 at 03:05 PM.

  2. #2
    Join Date
    Mar 2014
    Location
    Ma
    Posts
    1,951

    Default

    Beautiful


    Sent from my iPad using Tapatalk
    There's a hole at the center of earth where the rest of the world sinks but i stand still...

  3. #3
    Join Date
    Oct 2012
    Location
    NC
    Posts
    1,136

    Default

    Very nice looking boat, I would like to see pics of interior too if possible... DJ
    Tunnels-PS295. Cats-H&M M1 Supercat Daytona rivercat. Monos-DF Cyberstorm HiTech 29. Hydros- Ms K Vac-U-Pickle Custom built 37" shovel 10th scale converted to FE Shadow. Rigger-H&M Evo II. AQ Harbortug recovery boat. Build in progress 37" cf Dragboat

  4. #4
    Join Date
    Aug 2008
    Location
    By
    Posts
    159

    Default

    Hello

    today i start with the boat from Cervelo.

    Hydroplane CT 10 Tandem Wing in size 1:6

    Dimensions are the same as the CT13

    Design in Oh Boy Oberto

    Setup:

    Lehner 3060/8

    Esc 14S300 Amps by MBP (modellbaupirat)

    Lipos 10S3P 5000 maH with integrated heating

    Here a picture of the boat with the owner

    bye

    mudl


  5. #5
    Join Date
    Sep 2007
    Location
    Co
    Posts
    3,915

    Default

    I want to see more. Any build shots.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  6. #6
    Join Date
    Aug 2013
    Location
    Fl
    Posts
    2,451

    Default

    I found video of these boats running, https://www.youtube.com/watch?v=OzPv...1cs2NA&index=2

  7. #7
    Join Date
    Aug 2008
    Location
    By
    Posts
    159

    Default

    Hi

    here two other Videos from the CT 13

    First is taken on the ground and the second is the same from air view

    https://www.youtube.com/watch?v=XAF5...yCMhid7n1cs2NA

    https://www.youtube.com/watch?v=tAs2...yCMhid7n1cs2NA

    bye
    mudl

  8. #8
    Join Date
    Jul 2011
    Location
    VA
    Posts
    233

    Default

    Your hydro looks extremely fast from the air and it's huge. You guys run some of the biggest boats out there regardless of hull type. I'd like to see your twin motor setup.

  9. #9
    Join Date
    Jun 2012
    Location
    BA
    Posts
    22

    Default

    Hi guys.
    I want to show you some pictures of my CT 10 Oh BOY OBERTO.
    My setup is ....
    CT10 CFRP
    - Paint Brusher Andy
    - Design and Hardware Alex Clear
    - Engine LK 3060/8 WK 2 rides old
    - MBP 300A14S controller
    - 10S3P 5000 incl Lipovorwärmung
    - Prather Prop 6.35 DD

    Greetings
    Christian

    16.JPG

  10. #10
    Join Date
    Jun 2012
    Location
    BA
    Posts
    22

  11. #11
    Join Date
    Sep 2007
    Location
    NC
    Posts
    2,778

    Default

    Beautiful work as usual Christian.
    Tyler
    Tyler Garrard
    NAMBA 639/IMPBA 20525
    T-Hydro @ 142.94mph former WR

  12. #12
    Join Date
    Jun 2012
    Location
    BA
    Posts
    22

    Default

    Hello.

    Again some pictures.

    Greetings

    Christian

    28.JPG

    31.JPG

    8.JPG

    16.JPG

    25.JPG

  13. #13
    Join Date
    Jun 2012
    Location
    BA
    Posts
    22

    Default

    Hello.

    Again some pictures.

    Greetings

    Christian

    IMG_8970.JPG

    IMG_8994.JPG

    IMG_8995.jpg

    IMG_8997.JPG

    Pocking1.jpg

  14. #14
    Join Date
    May 2014
    Location
    ny
    Posts
    139

    Default

    Great job, these boats are awesome. They look perfect, I like the carbon coolers on the motor and the antenna mount you use. The pictures of the boats running came out great too, nice shots. Txs for sharing.

  15. #15
    Join Date
    Jul 2011
    Location
    VA
    Posts
    233

    Default

    Very scale looking as usual. Where does the batteries go? In the sponsons? If so, how do you access them since I don't see a latch or seam? Does Chris Tonn have a website?

  16. #16
    Join Date
    Mar 2014
    Location
    Ma
    Posts
    1,951

    Default Unlimeted Hydroplane CT 10 by cervelo and CT 13 by mudl

    This thread is awesome :yesway:

    I def have a huge soft spot for hydros. They're so cool... Especially scale looking hydros. On top of that, it runs awesome, so... Triple whammy!
    Sent from my iPhone using Tapatalk
    Last edited by Luck as a Constant; 10-21-2014 at 11:55 AM.
    There's a hole at the center of earth where the rest of the world sinks but i stand still...

  17. #17
    Join Date
    Aug 2008
    Location
    By
    Posts
    159

    Default

    Hi

    thanks for the compliments.

    Here some pictures from the innside of the CT 13

    Motors and esc's are in the very small cockpit of the plane.
    Lipos are left and right in side box on a adustable Lipo rail.
    The Lipos are connected together in front of the motors.So both lipopacks works on every esc.
    Steering servo and RC components are in a separate waterproof RC box in the right side box.

    bye
    mudl










  18. #18
    Join Date
    Aug 2010
    Location
    ms
    Posts
    3,024

    Default

    after looking at your boats ...mine look soo shabby... great looking boats guys
    MY RETIREMENT PLAN?????.....POWERBALL
    74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...

  19. #19
    Join Date
    Sep 2007
    Location
    Co
    Posts
    3,915

    Default

    Quote Originally Posted by ron1950 View Post
    after looking at your boats ...mine look soo shabby... great looking boats guys
    Two things they are not old and they do not race. so they will stay nice. But it is good to see how they do it. Thanks guys!
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  20. #20
    Join Date
    Jul 2012
    Location
    SP
    Posts
    975

    Default

    Very nice boats and could you please tell us what aktive aircooling is?How does it work ? Thanks Gill
    GO FAST AND TURN RIGHT !
    www.grsboats.com.br

  21. #21
    Join Date
    Aug 2008
    Location
    By
    Posts
    159

    Default

    Hi

    the cooling is the same how it works in a Lehner Motor with Lk.
    A fan is instaled inside the motor which is rotating with the rotor.

    greetings
    mudl

  22. #22
    Join Date
    Jul 2012
    Location
    SP
    Posts
    975

    Default

    Thanks Mudl.
    Gill
    GO FAST AND TURN RIGHT !
    www.grsboats.com.br

  23. #23
    Join Date
    Jul 2011
    Location
    VA
    Posts
    233

    Default

    I'd like to see the rear and bottom of the hull (and more pics overall). Very interesting setup that can only be done on a very large hydro setup due to space. What's the final weight on the water? Your boat gets on plane very fast and simply flies for a huge hull. You're basically able to catch up to the wake you leave behind which is incredible.

  24. #24
    Join Date
    Mar 2014
    Location
    Ma
    Posts
    1,951

    Default

    man, every time i watch that first video it just kills me.... that thing is so utterly bada$$! its just chewin that pond up..... Raw Rippin!
    There's a hole at the center of earth where the rest of the world sinks but i stand still...

  25. #25
    Join Date
    Oct 2008
    Location
    CO
    Posts
    9,488

    Thumbs up

    Simply amazing!!
    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

  26. #26
    Join Date
    Aug 2012
    Location
    ma
    Posts
    1,361

    Default

    I stumbled across those videos a couple weeks ago and I knew they had to be you guys. Incredible boats guys, the look like they run excellent!

  27. #27
    Join Date
    Jun 2012
    Location
    BA
    Posts
    22

    Default

    Hi guys.
    Thanks for the compliment. I Mudl and have lots of fun.
    Here are some pictures of my OBERTO.

    LG
    Christian










  28. #28
    Join Date
    Nov 2013
    Location
    VB
    Posts
    143

    Default

    May I ask why you did use a 3060 and not a 3080?
    Thanks in advance!

  29. #29
    Join Date
    Mar 2014
    Location
    Ma
    Posts
    1,951

    Default

    Man... Boats like that ^ are humbling. So clean.....


    Sent from my iPhone using Tapatalk
    There's a hole at the center of earth where the rest of the world sinks but i stand still...

  30. #30
    Join Date
    Aug 2008
    Location
    By
    Posts
    159

    Default

    Hi Guys

    here some new pictures from the CT 13

    The Front Wing is adustible by Radio control to get more up or downforce.

    On the Cockpit a LED Flasher is installed

    Also is in the exhaust (turbine) a Led Flashlight installed.
    At driving it looks like a real turbine

    greetings
    mudl








Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •