Summary:
I did some Eagle Tree testing today at the Badger pond and thought I’d share my findings. The same prop/setup/and water conditions were used for each test run. P.S. I chose an aggressive prop to stress test both motors a bit ;-)
The older version UL1 motor (circa 2012) had a bit more top end speed in the straights, ran cooler, and pulled more amps on average. The timing for the UL1 was set to 10 degrees.
The TP 3630 – 1950kv motor pulled less amps than the “old” version UL1 on average, but ran hotter, had less top end speed, but averaged higher speeds overall because it carried more speed through the corners. The timing for the TP 3630 – 1950kv was set at 0 degrees timing.
I will post the Eagle tree charts for each run tomorrow.
Bookmarks