Results 1 to 3 of 3

Thread: Double 2s or Single 4s?

  1. #1
    Join Date
    Sep 2014
    Location
    ON
    Posts
    14

    Default Double 2s or Single 4s?

    The owners manual says there is a slight performance advantage of using a single 4s lipo pack over double 2s packs in the Revolt 30.

    Have any of you noticed any advantage in the real world? (assuming mah, C rating etc are the same?)

    Thanks.

  2. #2
    Join Date
    Jan 2008
    Location
    VA
    Posts
    3,070

    Default

    If you are using quality packs, do a good soldering job on your connectors and your wires aren't too long I doubt you will notice any difference.

  3. #3
    Join Date
    Nov 2009
    Location
    US
    Posts
    5,557

    Default

    Correct, you wont be able to tell any noticable difference with good bullet soldering and minimum wire length. 2 x 2s is the easiest to fit and keeps the boat balanced well.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •