CNC stainless Octura copies

[TDA78]

Does anyone have any experience with these propellers?

http://www.ebay.com/sch/boatbullet_2...1&_ipg=&_from=

The X742 size is interesting.

[kfxguy]

Wish they had an m645

[dasboata]

I can't see them using the octura name on there much longer,, as that is false advertising and sure to p i s s off Octura ! and the Traxxas logo is a No no , I would think . I might get one just to check it out and resale it ! anyone need one LOL?

[ray schrauwen]

All from Ukraine, Russia and Poland... Beware of a crazy Ivan.

[kfxguy]

They are quite expensive tho

[dasboata]

All from Ukraine, Russia and Poland... Beware of a crazy Ivan.

Ray why does it say from Japan ?

[Shooter]

I bought one on Aug21. Haven't seen it yet.

[ray schrauwen]

I think there are multiple listings for these props, some say Japan others as above.

I know the sandblasted ones are from Chech. area maybe, Poland as they had a website for a while. Last time I checked it was gone so maybe they just use Ebay now???

Some from Japan too, different seller...

Ray why does it say from Japan ?

[Brushless55]

Might try the 642

[dasboata]

Might try the 642

If you get it you can send it to me I will go over it and check pitch diameter & balance for you no charge and go over it if you want ?

[TDA78]

I received my stainless X445. It shipped out of Dnipropetrovsk, Ukraine. A note was included with a website for Profi-Props.

The quality seems very high. The leading edge is almost as sharp as my Randy Rapedius prepared X442. The tongue edge could be a little sharper. There is the tiniest burr on the trailing edge as the result of a grinding operating after plasma polishing. I don't have a balancer to check the balance.

IMG_0503.JPG IMG_0504.JPG IMG_0505.JPG

It's too bad I won't be able to test it on the water until the spring.