Results 1 to 11 of 11

Thread: MG29 Leopard motor Help me choose Please...

  1. #1
    Join Date
    Jul 2014
    Location
    NB
    Posts
    97

    Default MG29 Leopard motor Help me choose Please...

    Here's my current setup geico29 , stock 1500 motor, 180a esc, 2 5s 5000mah 40/80c parallel, foam filled nose, blueprinted bottom, offset rudder x442 & x642 s/b and detounged. Running 45/46 mph on garmin gps. Heavy boat.. My question is I need to know what leopard motor to choose with my batteries as I have two sets 40/80c and 50/100c . Looking for more speed and not sure which 4082 to choose?

    Thanks for any info on the subject.

  2. #2
    Join Date
    Jul 2014
    Location
    NB
    Posts
    97

    Default

    Anybody? Please 4074 vs 4082 , 1600/1800 or 2000kv

    Thanks for any help.

  3. #3
    Join Date
    May 2014
    Location
    mi
    Posts
    619

    Default

    if it were mine I would go with the 4074 1800kv.

  4. #4
    Join Date
    Jul 2014
    Location
    NB
    Posts
    97

    Default

    Thanks revolt

  5. #5
    Join Date
    May 2014
    Location
    mi
    Posts
    619

    Default

    your welcome

  6. #6
    Join Date
    Nov 2009
    Location
    CA
    Posts
    1,969

    Default

    The fastest choice for 4S would be the 4074 2000 or 2200kv, but you would need to upgrade the ESC to handle the current.

    Chief

  7. #7
    Join Date
    Jul 2014
    Location
    NB
    Posts
    97

    Default

    Thanks Chief , but as listed above I already have a 180a esc and I'm using the 5s batteries that I have.

  8. #8
    Join Date
    May 2014
    Location
    Q
    Posts
    20

    Default

    If you are using 5s it would have to be 2200kv. Eg; 1800kv on 6s (traxxas Spartan) would give the same amount of RPMs as the 2200kv on 5s

  9. #9
    Join Date
    Sep 2016
    Location
    CI
    Posts
    22

    Default

    What size esc would I need to run 3674 2200kv on 5s please

  10. #10
    Join Date
    Jun 2017
    Location
    TX
    Posts
    22

    Default

    Hey 3-UP, you can get a rough idea by shooting for 35,000 RPM with the following calculation: 35000 / (3.7v x 5s) = 1891 kv which puts you closest to the 3.5D wind 4082. Your best prop for speed will be your x642 yielding high 50 mph speeds with probably high temps, so make sure you check your temps in frequent intervals. The x442 will get you high 40s or maybe 50 mph easily for extending runs, in my un-professional opinion. There are many other factors at play here so good luck. I love my MG29V3.

  11. #11
    Join Date
    May 2017
    Location
    OK
    Posts
    1,460

    Default

    Quote Originally Posted by blindpew View Post
    What size esc would I need to run 3674 2200kv on 5s please
    150-180a is very safe. The Turnigy-180 is what I'm using in my DF 29 Mono on 3674 1400kv on 6s. That's with a M445 prop, it runs about 52mph.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •