Results 1 to 5 of 5

Thread: 14.8V 5000 MAH 40C Lipo issue ?

  1. #1
    Join Date
    Jan 2011
    Location
    ON
    Posts
    497

    Default 14.8V 5000 MAH 40C Lipo issue ?

    Hi all out tonight running my P tunnel noticed after 45 seconds boat slowed to less than half speed brought it in checked voltage each of the 4 cells was aprox 3.99 v put it back on charger took 700 mah to re charge .To make sure this was a lipo issue put another pack in and ran for 3 minutes AT FULL SPEED with no issues. What can be going on with this lipo ? Regards Andris Golts.

  2. #2
    Join Date
    Apr 2007
    Location
    On
    Posts
    7,279

  3. #3
    Join Date
    Jan 2008
    Location
    VA
    Posts
    3,070

    Default

    What brand pack and how hold is it?? Are the two packs the same??

  4. #4
    Join Date
    Aug 2010
    Location
    VA
    Posts
    1,085

    Default

    Sounds like that questionable pack is due to head for a salt water bath..........
    Futaba Team Driver
    - IMPBA Hydro Technical Director -

  5. #5
    Join Date
    Apr 2011
    Location
    CA
    Posts
    5,666

    Default

    Quote Originally Posted by don ferrette View Post
    Sounds like that questionable pack is due to head for a salt water bath..........
    Yup, did that to 6 batteries last week, nice to watch the little bubbles and finally the corrosion takes place.
    Too many boats, not enough time...

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •