10th scale modern

[T.S.Davis]

so........ah? If one was going to build a 10th scale modern, what runs well?

We messed with some vintage a couple years ago and they don't all translate well to FE. I know the moderns will be the same way. A twin wing T Plus for instance isn't likely to have enough hp on a limited motor for the vents. UNless it only weighs a few ounces maybe.

Todd's Lobster runs pretty well but what a gob of work that took to figure out.

So who has tried what? Spill it please.

[JimClark]

Curious as to what you were disapointed in with the vintage boat's?

[T.S.Davis]

I should have said. Fred built a Notre Dam. It was the third we had done but the first at 1/10. I did the cowl for it. Came out pretty nice. Ran pretty good too. Took it to the nats and saw a discrepancy in between each of the boats. Some were really fast. Can't remember exactly which boats were which.

10th has never really been on my radar. My son was bugging me right after the nats about building one.

.....oh, for him of course. Him being my little hostage negotiator.

He gets all upset if his boat is slow. It's kind of comical to me. He yelled at me for making him hit a buoy at the 09 nats.

[Todd Fleury]

http://westcoastcustomboats.com/ - Craig Bradshaw make a great hull. That is what I have run.

[JimClark]

you can easily be doing 50 on a modern boat with a spec setup. The vintage boats I think the Karelsen designed hulls are the best for performance (of the vintage hulls) which is probably what the Notre Dame was especially if it was built with Gary F plans. Same hull design as my Bardahl.

[Darin Jordan]

Terry ,
Brian makes a MEAN 82u55 hull....

[JimClark]

I know Craig and he make very good hulls in carbon fiber. That said I would go with one of Mike's laser cut kits as I like to build them. i like making sawdust and I am toying with the idea of building another 1/10th and getting back into racing next year

[T.S.Davis]

I like the turbine boats. I like making saw dust too. I'll have to stew on it some.

Are there any plans to update the motor spec? I don't think you can buy those old blue AQ motors anymore.

[JimClark]

Sure seems like it would be talked about

Sent from my SGH-T989 using Tapatalk

[rayzerdesigns]

did you get a boat..or plans terry??

[leonard feeback]

Tower Hobbies has the aqua 7000 blue motor.

[T.S.Davis]

Tower Hobbies has the aqua 7000 blue motor.

Yeah, Ray pointed that out to me too. I actually found one in my box of prehistoric stuff. Hasn't been in a boat since 2009.

Ray, I bought a frame kit from ML for the 8255. Plan is to teach my 15yo son to actually build a boat instead of just pulling the trigger. Hopefully he wont glue himself.......to..........himself like his old man.

[Todd Fleury]

I would actually pay to watch one of you two glue yourself to yourself.

[Scott M]

Tower Hobbies has the aqua 7000 blue motor.

How does the aqua blue compare to the proboat motor 1500, is it legal for racing in the namba class, and what's the difference between the two? Thanks!!!

[ron1950]

ive had no problem getting my vintage to run well even with small props (45mm)....I know what u are talking about with the turban modern hull though .... next time out even though underpowered ill get it right....http://youtu.be/7BAfymCvji4

[Doby]

http://westcoastcustomboats.com/ - Craig Bradshaw make a great hull. That is what I have run.

whenever I click on this, my virus scanner blocks it??

[Todd Fleury]

I believe we now have a full class of 1/10 scale modern in our club?

[T.S.Davis]

I think Toms is a vintage and so is John's

[Doby]

Guess I'll have to look elsewhere as the site seems to be unsafe....who else makes 10th's?

[rayzerdesigns]

it is legal in namba..the newer version of the proboat(dynamite) motor seems to be a little better,,but they aren't produced anymore..but can still be found..also the himax motor is pretty good

[rayzerdesigns]

I don't see why it comes up like that..its a completely safe site..and great boats..though he has a pretty big waiting list right now..

[rayzerdesigns]

we have a club race this sunday..I will get some video..

[JimClark]

I know Craig personally for a few years now and the site is just fine. What antivirus are you using?

[Doby]

Avg

[bozo586]

I think Toms is a vintage and so is John's

ron squires boat is vintage too! talked to his daughter at larry's h/s ----he'll be back racing 2015.

[T.S.Davis]

Maybe if we run some scales Ron will quit threatening us and actually come race.

[bozo586]

i guess ron put his foot down and told the whole family he's going to race again. we will see when he shows up at the next meeting,i hope it's true.

[rightturnonly]

Scales...now that would be worth flying up for a race....I'm getting to old for this driving 13 hours north...glad to see this getting some interest in the Detroit area..

[T.S.Davis]

Avg

Craig is pretty buried right now. What are ya thinking John? Craig makes a short list and the are NOT cheap. They're sweet but not cheap. The 8255 I'm doing also makes the Executive like your 1:8.

[tjcast]

So do these hulls have to be 'registered' with some one so there aren't 5 of the same boat running in a heat at the same time?