Just a quick note to share.......I too had the non plane issue, I found going deeper in the prop depth helped a lot, I then slowly found the sweet spot, but in stock form about 2 or 3 mm below being flush with the top of the mount got the boat running just fine.
Last edited by trigger; 09-02-2014 at 07:23 PM. Reason: Was a bit generous on the size.......
NEWS FLASH!!!! They're $100 at Tower Hobbies. See: https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXEXNK
SCREAMING DEAL!!
I'd grab one but I have another project in mind. Stay tuned for a disclosure on the OSE Micro forum.....
A nation of sheep breeds a government of wolves
Link says they are discontinued?
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Sold off most of my micro stuff. Kept a small bit.
Maybe I'll build that laser cut Kitty. Might be a foot long, not sure. 4000kv ARC 20mmx40mm, plush 30 ESC.
Nortavlag Bulc
Bookmarks