Results 1 to 4 of 4

Thread: Has anyone reinforced their im31 v2 hulls ?

  1. #1
    Join Date
    Jun 2014
    Location
    az
    Posts
    7

    Default Has anyone reinforced their im31 v2 hulls ?

    The hull on the impulse 31 v2 seems a bit flimsy in certain areas has anyone done any hull reinforcements with carbon fiber or glass on this hull im new to the hobby and am looking for suggestions.

  2. #2
    Join Date
    Aug 2014
    Location
    IA
    Posts
    32

    Default

    Hi .308 is your real name 7.62 NATO? I'm also New, But I Took 30min epoxy and mixed up a batch, thinned it with alcohol and brushed everyplace I could reach. Darin has a thread on here building a race im31 and he is using CF. I'm not going racing we just Bash ours. Have Fun, Henry

  3. #3
    Join Date
    Jun 2014
    Location
    az
    Posts
    7

    Default

    Thats a pretty good idea what kind of alcohol did you use ? Denatured or isopropyl ? And did you just brush the epoxy where you could get it or were you able to get up in the bow where the foam is located ?

  4. #4
    Join Date
    Aug 2014
    Location
    IA
    Posts
    32

    Default

    I Used isopropyl, We use it in the engine compartments of our R/C Planes. Fuel Proof/Stronger. Nowhere near as strong as fg or cf , but My impulse does 49.1MPH it doesn't need to go any faster. I brushed it every where I could reach and two coats on the frame work.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •