Per our discussion, deposit sent for a GP265v2 with FE Prototype Cowl build!
Thanks, Tim
Per our discussion, deposit sent for a GP265v2 with FE Prototype Cowl build!
Thanks, Tim
Last edited by timjz; 07-23-2014 at 12:52 PM.
I got it! Thanks Tim. I will add you to the list. Mike
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
The GP400 kits just arrived. I know what I will be doing this weekend! Mike
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
Cool!
All of the kits are ready to start building. Had to take all the parts out of their cut sheets. I cleared up most everything that had to get done ahead of these builds, and I got all 4 cowlings for the GP400's laid up this weekend, so that is out of the way! They turned out great! mike
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
Sounds great. Waiting to see more. Feel no pressure
Are very grateful for the opportunity to get this boat built by Mike
Have ordered some stuff for the boat. Speedmaster strut and rudder from the OSE.
Castle / Traxxas XO-1 motor, 1650kv from Ebay and water jacket from OSE.
Would like to get the turn fin, not sure where I'll get it.
Are not sure which esc I should use, since previously a Flier 300A/8S, Turnigy 180/6s and Etti 150A/6S but considering a esc with dataloging. Any thoughts?
Really looking forward to putting together this boat and especially driving it!
Lasse
I spoke to Dick Tyndall/ Virginia Craftsman last night. Anyone needing fins for their build, contact me. I can have him ship all of them to me, so I can ship with your boats out to you. I will get his paypal address, and you pay him directly for the fin and shipping to me. Mike
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
Hi Mike, thanks for everything, I would like to have a fin from DT/Virgina Craftsman.
I am so glad that I am back in this country!
Too many boats, not enough time...
Hi Mike!
I´m in for a turnfin too!
Yes Mike, I would deffinetly like a turn fin from Dick Tyndall.. I've got everything else for the build and a MGM TMM 28026-3 X-2 lite series ESC is on it's way. I've even got my paint design drawn out.. It's really cool to have the boat built by the man himself!!
Sounds good guys. I had already discussed this with TimNJ, and he wants one too. Just need to see if Darryl needs one, and I will put in an order to Dick as soon as possible. Mike
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
I'm in for the turnfin as well, let me know when & where to pay. Also, could you send me a hardware list whenever you get a chance?
Really looking forward to this, not sure if I'm going to paint it of leave it as is?
Thanks, Tim
nice lids , on the turn fins , r u going to mount them, if we order them from u?
also I sent u 200$ more on my bill, thanks Darryl Whitman
yes I will need one , turn fin from Dick for the boat.
Darryl, I received your next deposit. Thank you.
Looks like everyone wants fins for their builds. No problem. I will get those ordered.
I got a lot done today, all (4) gp400 kits were sanded down, and (3) pairs of sponsons were mostly finished. I should continue on tomorrow. These should be done soon. Tim, your gp265 kit has been ordered, just has not arrived yet.
More soon, Mike
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
Wow! This looks amazing!
Mike, Thanks!
LMK when I need to pay for the turn fin.
Too many boats, not enough time...
Man I like progress, won't be long now! I'm getting so excited, I got comfirmation on my MGM ESC today too. I should have it the middle of the week, I can't wait to get this thing in the water!!
Nice progress! I can´t wait to see more.
Any motor in your mail?
Let us knowe when to pay for the fins.
Mikes the one, I bet he can build them with his eyes closed. LOL but I know you won't.
great job Mike ,
Mike, Haven't heard from ya in 3 or 4 days, how we doin'? I can't hardly contain myself, I don't think I've been this excited about getting something since I got my first Dirtbike when I was 8yrs. old that was 42yrs. ago!
Hey, I got the other sponson pair built and started on one of the center sections. I will get more done tomorrow most likely. So cowlings had to be made for some customer orders, so i am working on those too.
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
Woke up early and got the 1st center section just about done. I should have the other 3 done later in the week!
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
I'm just messing with you mike, take your time. They're looking great!!!
Haha, thats funny. I woke up early as a friend was bringing me 5 gallons of resin, 3 gallons of various gel coats this morning, so I had time in the garage until he arrived!
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
Pics when I get time tonight...All 4 center sections are built and ready for epoxy and top decks! Mike
Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
Mike, the pictures look so good! thanks for the update.
Cheers !
Too many boats, not enough time...
Bookmarks