Hey all,
I'm having a small problem with my seaking esc's and TP 4050 motors. Everything was great initially, i hooked it up, ran the boat for quite a while. The next day I went to run it, one of the motors wouldn't spin as fast (initially) as the other one, causing the boat to roll and/or turn. I switched the motors and esc's and the motors are fine, so it's one of the esc's that's the problem. The timing is set to 15, cell count at 6s. Not sure what happened to it. It did get wet though, would that cause this kind of behavior?
Bookmarks