Results 1 to 3 of 3

Thread: Allow myself to introduce... myself.

  1. #1
    Join Date
    Apr 2014
    Location
    Or
    Posts
    5

    Default Allow myself to introduce... myself.

    Hey guys my Name is Mike. I have had my UL1 for about 2 months and this video is my 3rd time taking it out. First time I took it out I dropped a prop off of the flex shaft and waited for the wind to pull it in. The 2nd time I had the Grin Racer 3 blade prop but couldn't get it too plane out possibly due to my 5000 ma batteries being placed right at the very front. I moved them back about 1/2 an inch and this is the result. BTW. I know it would rather turn left. As you can see in this Video.UL1 Superior Grim Racer prop upgrade. http://youtu.be/86DXl8xTln0

  2. #2
    Join Date
    May 2009
    Location
    NJ
    Posts
    1

    Default

    Hydro's turn right, not left, your boat flipped because it tripped on the turn fin.

  3. #3
    Join Date
    Sep 2013
    Location
    IN
    Posts
    853

    Default

    The set up does not look right either, it takes time and effort to dial these in. The back end looks to be hopping, at flat out the rooster tail should be flat. I really don't want to give a long list of suggestions, everything you need to dial it in is within the pages on this forum. Make a change, go test it, and so on till you get it right. don't give up, read, search, test. Start at the sticky race prep set up. loads of good info.

    Here is mine, yellow lead boat. - there are faster ones out there, but I like it. http://youtu.be/yb9pj8NPA2E

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •