200 amp controller with 4160 hybrid

[Doozie870]

Up for sale is a 200 amp pistol compatable (at least with a spectrum on 6volts) esc, and a hybrid outrunner/inrunner motor 4160 1600kv. bench tested one time without load. shrink has been opened just to take a look inside, also red wire going to reciever has been cut. not sure if this was needed but didnt want to smoke anything using a reciever pack.
some specs.
This is a new type of motor, with an outrunner system built inside an inrunner case. Giving the performance and torque of an outrunner with the no moving external parts ease of use of an inrunner.
Spec.
Length: 60mm
Diameter: 41mm
Shaft: 5mm
Weight: 229g
Kv: 1600rpm/V
Power: 1250W+
Resistance: 62ohm
ESC Required: 60A or higher.

$100.00 shipped for both


100_4893.jpg

100_4897.jpg

100_4896.jpg

100_4894.jpg

100_4895.jpg

[crazzy maxx]

how much for just the esc

[Doozie870]

How about $65 without the motor ends, as they are a odd ball size.

[crazzy maxx]

im getting payed end of the week but if anyone else wants it give it to them

[H2OCamel]

Doozie if crazy maxx wants the hole thing I don't need it :)

[crazzy maxx]

all i want is the esc. you can have the rest

[RCprince]

Where are you guys finding these motors

[RCprince]

Doozie I'm been on that site for months, I just look, but have never seen that motor. I'm impatient I like to have my stuff with in a few days

[toyotatruckin]

look under the outrunner tab

example

http://www.hobbycity.com/hobbycity/s...trunner_2900kv

[Doozie870]

motor sold.
Esc still available, you will need solder connector ends on motor side.
$55.00 shipped.

[lonewolf]

pm sent on esc