Results 1 to 2 of 2

Thread: swordfish 220/300a lvc no protection setting

  1. 05-19-2014, 11:02 AM #1
    nitrous8e
    nitrous8e is offline Member
    Join Date
    Dec 2011
    Location
    oh
    Posts
    30

    Default swordfish 220/300a lvc no protection setting

    I am using a Swordfish 220/300A 2-6s ESC with bec on 4s2p how do i set the LVC to " no protection" . the program INSTRUCTION sheet shows
    LVC AUTO ---- 5.0 V 6.0V 7.2V 8.4V 9.V 12.0V as choices suggestion please! i do have the V-S program box ...
    Reply With Quote Reply With Quote
  2. 05-19-2014, 12:59 PM #2
    flraptor07's Avatar
    flraptor07
    flraptor07 is offline Fast Electric Addict!
    Join Date
    Aug 2013
    Location
    Fl
    Posts
    2,451

    Default

    I thought you could turn it off but I just looked and you can't, I'd set it at the lowest setting and time your runs. You'll have to do some testing to see how long it takes to get the packs down to what you're shooting for. I don't know what else to tell you, unless somebody else knows a way to turn it off.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules