2014 West Florida Model boat club, Sarasota, FL

[tiqueman]

Just bought a cutter. have been following reviews and projects since october on the silohette cutter. You can import your own designs, upload shapes and import images printed on other vinyl to have it machine cut your edges. Also had the opportunity to use one not long ago and it seems itll do all id need it to do..

Not sure yet about the blasters event. Two out of state vacations scheduled around that time so ill see when we get closer.

[rdcracer]

I was also looking to use it to make masks. That Silohette cutter looks like the ticket. Let me know what you think about it. I dont want anything big, just big enough to make masks for painting. I would appreciate it if someone filled me in on the printer method also.

[tiqueman]

I used, think its papillo?, vinyl (i got clear and white). Print whatever it is you want. Let it dry then cover it in avery clear laminating sheets. The papillo i had to order online. The avery i purchased at office depot or staples. Cant rememeber which.

[flraptor07]

ok Hugh and I are in for the waveblasters anyone dlse?

Ron I think I might want to get in on that, it's quite a ways off yet. I'll let you know for sure when it's closer.

[RayR]

I used, think its papillo?, vinyl (i got clear and white). Print whatever it is you want. Let it dry then cover it in avery clear laminating sheets. The papillo i had to order online. The avery i purchased at office depot or staples. Cant rememeber which.

these

[tiqueman]

these

Si senor

[bill34207]

Why we don't run our boats while the rescue boat is in the water.

[tiqueman]

Exactly

[rdcracer]

After a it like that you would think the 2 guys would be in the water

[bill34207]

Or at least making a run for the port-a-can

[rdcracer]

Well I gt the hull painted. I dropped my Iwata brush and had to us cheap Harbor Freight brush so detail really stinks. It'll do for now. Just got my Speed control and rest of setup stuff from OSE today. Should have it running for next Sunday.

DSCN2511.jpg

[flraptor07]

Well I gt the hull painted. I dropped my Iwata brush and had to us cheap Harbor Freight brush so detail really stinks. It'll do for now. Just got my Speed control and rest of setup stuff from OSE today. Should have it running for next Sunday.

DSCN2511.jpg

WOW Rich! That's way different than you said you were going to do it, that looks amazing!!

[rdcracer]

It was pretty funny The airbrush sucked and I kept adding stuff to cover up and this is what I ended up with.

[bill34207]

That's way too pretty to be racing with.

[RayR]

Very nice!

[ron1950]

Dont know what temps u guys will get out of the artic blast but there is a solid inch of ice on the windshield and 16 degrees and no electricity here in east tx dam its cold

[RayR]

Dont know what temps u guys will get out of the artic blast but there is a solid inch of ice on the windshield and 16 degrees and no electricity here in east tx dam its cold

Ron, u need to motor that motorhome over here.

[flraptor07]

The Rescue Boat has steering now IMG_20140302_172805 (2).jpg

[RCKong]

Dont know what temps u guys will get out of the artic blast

What arctic blast ? I was out running some boats yesterday and got a bit of a sun burn ... LOL

Cool job on steering the rescue rig. Looks like my old Hurst 4 speed shifter

/www.youtube.com/watch?v=2zqpYzt0XZ0&feature=em-share_video_user

[R.J.S]

Ron,it's a no brainer,East Bound and Down!LOL!
JS

[ron1950]

Ran out of propane still no outside electricty on generator all day Couldnt get propane cause places tanks were all frozen this sucks as one elect heater ant cutting it lol... Only thing working is 4g on phone

[rdcracer]

is that a 4 speed n that rescue boat.

[RayR]

is that a 4 speed n that rescue boat.

I do believe that's a shifter adapted to trolling motor foot pedal. Clever.

[osprey21]

Dont know what temps u guys will get out of the artic blast but there is a solid inch of ice on the windshield and 16 degrees and no electricity here in east tx dam its cold

It was absolutely brutal here yesterday....

F7cvN3g.jpg

[nammer]

hi all, hope it's ok to post this here, I thought I would get a little more exposure to local members, but my aquacraft revolt 30 is up for sale, thanks!

https://forums.offshoreelectrics.com/...lipo-batteries

[bill34207]

hi all, hope it's ok to post this here, I thought I would get a little more exposure to local members, but my aquacraft revolt 30 is up for sale, thanks!

https://forums.offshoreelectrics.com/...lipo-batteries

Having looked at the FS ad, you should have taken the money offered and ran. Sunken boat with steering already acting funny, it's only a matter of time til the ESC craps out as well.

[flraptor07]

is that a 4 speed n that rescue boat.

I do believe that's a shifter adapted to trolling motor foot pedal. Clever.

Y'up I think it's gonna work pretty good, I just need to make a little linkage to activate the switch and it'll be done.

[tiqueman]

Rich that looks fantastic.

Hey guys, my vinyl cutter is up and running. Im limited on colors now but should have a variety in a couple weeks. Ive got red, black, white, bright orange, royal blue and tan at the moment.

[tiqueman]

Chris called in sick today as I heard hes home installing a whipple charger on the rescue boat.

[flraptor07]

Chris called in sick today as I heard hes home installing a whipple charger on the rescue boat.

How'd you know?