BBY New twin 4S rigger

[RandyatBBY]

I have been working on the molds for quite a while. about 1.5 years. I wanted them to be nice. I wanted a hull that has good enough quality not to need paint. this metal flake was done in the mold. This boat will be for 4S SAW racing and I have plans to do a oval boat too all I need is the long skinny sponsons.






Uploaded with ImageShack.us

[srislash]

ooh, very nice Randy. Love that metalflake.

[gsbuickman]

Damn Randy, mesa' like. I am not an expert on riggers, but I am intrigued. I've never seen a twinn rigger. Nice work, I love the metal flake. What are you looking at for final measurements on the tub & overall ?. What power system are you planning on running ?, thanks

[RandyatBBY]

Damn Randy, mesa' like. I am not an expert on riggers, but I am intrigued. I've never seen a twin rigger. Nice work, I love the metal flake. What are you looking at for final measurements on the tub & overall ?. What power system are you planning on running ?, thanks

There is a yard stick showing the length of a P Hydro in my world of NAMBA. Not sure on the motors yet all depends on what I find, to go with what I find to match one of the Neu's I all ready have.

[Brushless55]

Pure awesomeness!

[flraptor07]

TOO cool! Makes me want to build a Rigger now, please let us know if you start selling these.

[RandyatBBY]

TOO cool! Makes me want to build a Rigger now, please let us know if you start selling these.

I just have the last test fitting to do with the new parts, then I hope it will be correct and ready. I am in the middle of two cool builds for customers: a twin 1/10 scale drag boat and a 1/8 Scale built as a twin drag boat. but both pf them should on another thread.

[flraptor07]

Randy, I have a pair of 4074 2150kv tacons, how do you think those would do in this I also have a pair of 3674 2650kv Leopards.

[RandyatBBY]

Randy, I have a pair of 4074 2150kv tacons, how do you think those would do in this I also have a pair of 3674 2650kv Leopards.

Sounds like a 6S set up and after it is dialed the faster motors would be a good way to go.

[RandyatBBY]

Little more done on the twin

[Fella1340]

Very cool. The metal flake is a great touch

[flraptor07]

I've been thinking about a rigger, a twin rigger would be even better! OK Randy what kind of power were you thinking about in this and how long is it? DUH! I should have looked at the top of the thread......... Well Randy when you get my SS Hydro done we'll have to talk about one of these.....

[RandyatBBY]

There is another setup on twin 6S that fly's in oval trim, that I plan on too. It will have wide span and narrow sponsons with this tub design and the Oval sponsons. Chris I love building for you you get the time it takes to do it right.
This is the setup about 37 inches long.

[flraptor07]

Well Randy it's because I'm also in the custom/fabrication business. I co own a Auto Restoration / Street Rod Shop. Here's our Facebook page https://www.facebook.com/kcsclassics?ref=br_tf

[Fella1340]

Are you not using the metal flake sponsons for the build?

[rickwess]

I love red metal flake. I want an red metal flake RC boat to match by full size boat!!!!

[RandyatBBY]

Are you not using the metal flake sponsons for the build?

Yes I am I just was showing a "idea" and that was the only correct shape sponsons I had. Chris all but the deck is layed up. I am taking a break then Getting back to it

[flraptor07]

No problem Randy, I've pretty much made up my mind I'm doing a twin rigger next! Hey Randy have you seen one of these? http://www.ebay.com/itm/281214643110...84.m1423.l2649 I really like the way you can adjust the sponson angle on it. It wouldn't be hard to make those plates and incorparate that in your boat. I was even thinking about building the turn fin into one of the plates but I don't know how it would work on the front side of the center tub instead of on the sponson.

[RandyatBBY]

Well I have done a little more on the twin tomorrow I will be wittling a bit more.

[flraptor07]

Hey Randy,
ya gettin any closer to having these ready in kit form? I got all the power for it, two Etti 150 Navy Optos and 3 or 4 different pairs of motors to chose from.

[RandyatBBY]

Hey Randy,
ya gettin any closer to having these ready in kit form? I got all the power for it, two Etti 150 Navy Optos and 3 or 4 different pairs of motors to chose from.

I just have to build it, this was the final part I have not done before. Ya have a 1521 .5Y to trade? One of the motor choices I have one of and I am looking for. I know Steve has three or so.

[flraptor07]

I just have to build it, this was the final part I have not done before. Ya have a 1521 .5Y to trade? One of the motor choices I have one of and I am looking for. I know Steve has three or so.

No Randy I sure don't, I had a 1.5D 1860kv and I sold it to Travis. Anything else ya need?

[RandyatBBY]

No Randy I sure don't, I had a 1.5D 1860kv and I sold it to Travis. Anything else ya need?

Just the normal..... get this and everything else done, sell a few boats a week so I can have fun.

[ufoDziner]

Hello,
I'm looking for a twin saw rigger, but don't see this on your site. How would I go about ordering one? Thanks

[RandyatBBY]

Hello,
I'm looking for a twin saw rigger, but don't see this on your site. How would I go about ordering one? Thanks

The best bet is to call me after 11:00AM to 6:30PM PST Monday threw Friday. You can also email me that is slower because I only answer in the mornings. I am trying to stay more focused at work, so in order to stop my surfing at work I cut out the internet.

[RandyatBBY]

Second boat is done and will be tested if water is good and there is time this weekend at the races. First boat is mine and still working on it. I was at this point os the build and I had the accident .

[RandyatBBY]

I have a bunch of pictures to catch up on hear all most do not know where to start.

[RandyatBBY]

[RandyatBBY]

[RandyatBBY]