I accidentally destroyed my previous recovery boat by hitting it with my miss geico. Yea. I cant drive lol. Tunnel vision is what I have. I gotta work on that. Well this drove me to build a nicer recovery boat. The other one worked flawlessly so basically made this one stronger and nicer built. I dont have a step by step build but ill do the best I can. I finished it up last night.
Heres the motor mounted. I used a plano water tight box to house everything.
20131128_181604.jpg
heres the frame. I mount the box to the carbon fiber plate.
20131129_205458.jpg
I did a carbon inlay (lol) mainly because I developed cracks in the bottom where I drilled dome holes and put loctite. The loctite made the plastic brittle.
20131130_131618.jpg
this setup is a tad heavier so the back end sat too far in the water.....so I made a float for it. Two pieces of foam cut to shape and then sanded and covered with one layer of carbon fiber and two coats of resin.
20131129_191558.jpg
Heres the internals assembled
20131201_122937.jpg
Bookmarks