Results 1 to 5 of 5

Thread: imp 31 basics

  1. #1
    Join Date
    Oct 2013
    Location
    va
    Posts
    28

    Default imp 31 basics

    I purchased a used gen one with adjustable tabs ,the boat needs to get back more on the pad im running 4s on stock motor and esc with a grime reapor 45x22 sharpened and balanced,what angle should I set the plates at they have to be undone to adjust so I would like a good start point if I can get one
    Im looking for speed and a good handling boat right now it digs the nose and flips

  2. #2
    Join Date
    Mar 2013
    Location
    ny
    Posts
    367

    Default

    you don't need the trimtabs on that hull ,i put mine all the way up and 0° angle

    i guess your strut has to much negative angle :so it's pusching the nose to much down

    maybe a picture of the back?

  3. #3
    Join Date
    Oct 2013
    Location
    va
    Posts
    28

    Default

    over the weekend I made some runs with the prop shaft as far up as I could get it and it still stayed pretty level my tabs were at 0 degrees

  4. #4
    Join Date
    Oct 2013
    Location
    va
    Posts
    28

    Default

    boat met a turtle at high speed and is now totalled

  5. #5
    Join Date
    Nov 2009
    Location
    CA
    Posts
    1,969

    Default

    Sorry to hear about that-- those things are like lake land mines...
    If you get another impluse I have a useful setup/running guide (for the V2) that also covers upgrades and prop selection, it is a word file, if you would like a copy of it my email is jqhydro@gmail.com. I personally like the x642 for the stock setup.

    Chief

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •