Here are some photos of the upgraded parts I received from OSE. The Seaking 180 amp esc was a very tight fit but by trimming some of the rail I was able to get it in. The water tubing that connects both sides of the esc and cant be seen in the photo's fits perfect with no kinks. The new parts include the following.
Leopard 4074, 1650kv motor.
Rear motor brace. I will make up some brackets for it and fasten to the rails.
Seaking 180 amp ESC V2.
Octura S&B M445 prop.
OSE upgraded flex cable.
Octura flex hex coupler.
Speedmaster adjustable trim tabs.
OSE 1/4 inch silicon tubing.
Silicon tubing clamps.
I will be running this boat with 2 GensAce 3 cell 5000mah 40c lipo's connected in series for 6 cell.
My radio is a Spektrum DX3R pro.
I am running the same set up in my Black Jack 29 minus the trim tabs of course. I still have to solder and button everything up, after that it will be working on my canoe for the recovery boat. Thanks to all who took the time to help me out with this project and steer me in the right direction with parts. I cant wait to get it on the water. I have my own personal pond on my property but im afraid this boat would be across it in 1/2 a second. _DSC5165 copy rs.jpg_DSC5168 copy rs.jpg_DSC5171 copy rs.jpg_DSC5172 copy rs.jpg_DSC5174 copy rs.jpg