Got my hull today....stay tuned
Got my hull today....stay tuned
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
It going to be a basic clone of this...
https://forums.offshoreelectrics.com/...eye-quot-Hydro
But with P-Power (Got a few different motors to try out)
And I promise to come up with something more original that a black and white checker theme this time
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Motors I currently have are:
http://www.offshoreelectrics.com/pro...u-1521&cat=117 in a 1.5D winding.
http://www.offshoreelectrics.com/pro...o-4074&cat=148 in the 200KV rating
http://www.hobbyking.com/hobbyking/s...dProduct=11183
By the time I get through messing around with those, winter should be here.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Lets try one on Saturday at Boxwood....
DJI Drone Advanced Pilot
Canada
I want one but I just can't figure out how to get a Leopard 5698 on 10s 2p in it! LOL But seriously how do you think a Neu 1515 2200kv on 6s would work in it?
6S on 2200Kv????? Holy overpowered Batman....48000 Rpm!!!
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
ya I agree that new 1515 2200 is a 4s motor....prob get some magic smoke sooner or later
MY RETIREMENT PLAN?????.....POWERBALL
74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...
Ah, I am glad you have got your second Popeye, John!
When we are no longer able to change a situation, we are challenged to change ourselves.
Email: monicagong76@qq.com
Be nice...or yours got "lost" in shipment!
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Hey... where are the pictures... :)
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
Actually closer to 40,000 under load. I ran a Castle 1515/1Y in my 6S cat to 89 mph through the traps (not GPS) many times without letting out any smoke - but then it was two 5 seconds passes then back to the beach. Totally a SAW setup, but it works well as a P Sport Hydro motor on 4S.6S on 2200Kv????? Holy overpowered Batman....48000 Rpm
.
ERROR 403 - This is not the page you are looking for
Yes, even 7S is really too much. Six S is plenty, if you can't go fast enough with that you need more motor, not more cells. I topped out at 89 mph no mater what I did in my 32" SAW cat, I needed more (longer) motor (1521 or 1527) to go faster. I was only a few mph slower running 4S and a 1521 in the same boat at the same event.
.
ERROR 403 - This is not the page you are looking for
And back on topic we go.......
Popeyes..........
Popeyes 001.JPGPopeyes 002.JPG
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Woww, it appears the yellow and blue looks the best!!!
What a nice paint job!!!
DJI Drone Advanced Pilot
Canada
As I'll be using more powerful motors on this boat, I asked TFL to add some carbon tubes along each side of the motor mounts for a bit more strength..there is absolutely nothing wrong with the stock motor mount, but I prefer things to be reasonably bullet proof.
Again, TFL was nice enough to agree to do this for me.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
There is unexpected amount of expanding foam installed so I am sure it will....
DJI Drone Advanced Pilot
Canada
Not a stupid question....looks that way in the pics...but they are the same size.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
No way, the white one is the longest...
DJI Drone Advanced Pilot
Canada
Got my Leopard 2000Kv motor and Seaking 18 installed: Had to modify the motor mount holes a bit to make everything fit.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Finished it off in a totally new color scheme.....no more black and white checkers this time....
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Bookmarks