Results 1 to 2 of 2

Thread: programming 35 amp turnigy esc

  1. #1
    Join Date
    Aug 2013
    Location
    NY
    Posts
    119

    Default programming 35 amp turnigy esc

    cant seem to get programmer to power up followed instructions and programmer is dead. Any help would be greatly appreciated. Ran boat this weekend and then on second battery boat died in water, Let everything cool down and tried again and motor was making screech sound and very hot. order another but I was thinking maybe esc was not programmed correctly and caused motor to fry .I am a newbee and really could use some help getting these problems corrected.

  2. #2
    Join Date
    Sep 2013
    Location
    IN
    Posts
    853

    Default

    You have to plug in the motor to the ESC and then to the programming box, lastly to the battery, it should then power up. I've had a screeching motor too, which resulted in buying a replacement. Hope this helps.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •