Try it this way
http://www.youtube.com/watch?v=j96Z12PdVmc
Try it this way
http://www.youtube.com/watch?v=j96Z12PdVmc
Cool video, thanks Chief. Now I see what it should look like. Unfortunately mine doesn't have that much punch. Maybe it's the prop, when I get it in I'll install and test.
I'm going to switch out the rx and see if maybe that cures the communication issue. If you saw my video, I got out of range twice.
Last edited by stelerzman; 08-07-2013 at 06:36 PM.
Oh, check this out. I looked for some way to find an accurate speed of my UL-1 and after several options I check the Android app market and there's a GPS speedometer. This works very well, I tested it in my work vehicle and it's pretty accurate. I'll test it out this weekend and let you all know the results.
Your damaged prop could make it hard. Try to fix that asap.
You can also throw the boat in the water with some forward momentum and go full throttle when it hits the water
Sent from my XT890 using Tapatalk 2
What prop is on the hydro in the video?
That is an x442, but runs hot--I keep it under 3:30 which is enough for 6 laps. It runs really well and cooler on m440 or x440. But not sure which prop is best for the UL1 hull. I just don't think you necessarily need a 3blader.
Chief
Sent from my XT890 using Tapatalk 2
I could go with the 2 blade lifter prop, or is there another option??
Please explain he effects of a lifter prop, does it lift the front or rear of the boat?
Thank you.
Lifter props are good for hydros,because you want the rear of your ul-1 to ride on the prop. An excellent prop for the ul1 is a L40/57/3 grim prop. However it MUST be balanced and sharpened, and because grim props also contain titanium they're extremely difficult to do nicely.
The best overall props on the ul1 in my experience was the x440 and 40/57. For me anyways
Here's a vid of my Elam with x440/3
http://www.youtube.com/watch?v=K5iLP...e_gdata_player
Sweet, thanks again for the info. I still don't know why my boat doesn't have the same " punch" as yours does. I hope to get my props soon, this way I'll know if that's the problem.
Thanks 50
How did you get the reading????
A gps unit
I have a Tekin redline 7.5 turn bl motor, can I run it in the UL-1???
I ordered some stuff from Kintec Racing, how are they for fast shipping???
Has anyone tried one of these? http://www.ebay.com/itm/DANE-ELEC-DA...item484c6b853e
I'm sure your damaged prop is cavatating which is why you have no power out of the hole
Chief
Sent from my XT890 using Tapatalk 2
[QUOTE=BHChieftain;519699]I'm sure your damaged prop is cavatating which is why you have no power out of the hole
Chief
Sent from my XT890 using Tapatalk 2[/QUOT
Oh I'm sure it is, I'm still waiting on my props.
Anyway, I just got back from the lake. I wanted to know the speed of the boat with the chewed up prop and was I shocked. I pulled a max speed of 40 mph. I couldnt believe it,
What can I expect with a new prop?
Which 2 blade prop should I get?
http://www.offshoreelectrics.com/pro...od=dh-aqub9700
http://www.offshoreelectrics.com/pro...od=dh-aqub9715
http://www.offshoreelectrics.com/pro...od=dh-aqub9725
http://www.offshoreelectrics.com/pro...od=dh-aqub9755
http://www.offshoreelectrics.com/pro...od=dh-aqub9758
There are so many to choose from, I'd hate to buy one and not be able to use it. Thanks.
I used to use the m445 on mine ran great at 53mph with no problems with all stock electronics
I'm married with children, you can't scare me!
Has anyone heard of a "Blake" built V hull gas boat??? Ihave a chance to get my hands on one with out a canopy for free. Is it worth converting it to electric????
Parts are coming in, so I should have some upgrades done soon. I also have a HD camera on the way, so better quality videos are near.
Regarding 2 blade vs. 3 blade-- I have 7 boats, 2 hydros. Once I tried a 3 bladed prop but did not really notice a difference-- it is really a hassle to sharpen and balance the 3 blade props, so unless you are going CNC I just don't think they are worth the extra hassle.
Chief
thanks for the info.
Does anyone know why Kentic is soo slow in shipping? I know I should buy from OSE and I have , I just need stuff that OSE didn't have in stock.
Thanks.
Bookmarks