I finally got around to running the Motley Crew that I have had for some time, this is new and never been run before. I charged 2 Hyperion 2S 45c 5000 mAh Lipos and installed them. I had previously aligned the prop shaft and greased the drive line. I have a new OSE drive shaft and 42 X55 GR prop but wanted to run it stock to then see the improvements. It was a little sluggish at the start and noted to my self to move the batteries back and there was some hesitation with the throttle It started to get on plane and then stopped. Got the boat back and when I opened the hatch there was a definite burnt smell and the motor was almost too hot to touch. The ESC was not hot. I checked the water lines and there was no obstructions and I could see some drops in them. I let it cool down and now it does nothing. There no longer is a signal between the transmitter and the boat since there are no beeps, in fact, I thought there was a small light on the receiver and there is nothing now. I did try to reset it and there still is no light. Does anybody have any idea what is going on?
Bookmarks