Results 1 to 2 of 2

Thread: blackjack 26 brushless setup update

  1. #1
    Join Date
    Jul 2013
    Location
    sk
    Posts
    2

    Default blackjack 26 brushless setup update

    hello

    i want to update my proboat blackjack 26
    with a HB3650 1500watt 1700kv 80A 6s 22,2v 13 turns brushless outrunner heli motor class 500.
    is that a good idea??: Confused1:

    also i want to buy a aluminium hardware rudder and strut and a 200A 6s esc for it.

    is this motor update a good idea to go faster: Smile:

    thanks
    Meeuwsen
    Last edited by Meeuwsen; 07-11-2013 at 01:46 PM.

  2. #2
    Join Date
    Jul 2013
    Location
    sk
    Posts
    2

    Default

    I can also buy a

    Feigao 540XL "Extra Long" Sized Brushless inrunner Motor 1898kv

    6-24 NiMh or 2s to 6s Lipo cells in a medium to large sized 75mm in Length. mono or hydro.
    1000 Watts Maximum with proper cooling.
    35.8mm dia x 75mm long
    5mm Output Shaft. Use 5mm Couplers.
    372 grams
    9 turns
    Up to 1000 watts of power with proper cooling. 74A
    for PROP 15x10 APC-E
    50,000 rpm bearings!
    Aluminum Purple Anodized Casing
    2-Pole Neo Magnets & Compressed Windings.
    Mounting screw holes are 25mm apart on center.
    3mm mounting screws.

    but I think the 1500watts motor is faster than the 1000watts motor,
    I want to have a high speed boat.
    what motor is the best?
    Last edited by Meeuwsen; 07-11-2013 at 01:45 PM.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •