UL-1 programming issue

[Xjay98]

Just picked this up last night and after waiting all day to get in the water I can't program the esc. I followed the instructions. With the transmitter on I plug in both batteries and all I get is beeping that never stops until I pull the trigger. Then it'll beep once. I then release it and nothing till I hit reverse, which I'm not supposed to. Once I release reverse to neutral I get the three beeps. So neutral is trigger pulled and forward is neutral position. Tried everything I know like switching motor wires and rev on the transmitter. Please help the sun is going down!!

[Heaving Earth]

Make sure throttle channel is reversed and trim all the way up, then try

[thaynes]

May also have to hit the little tiny bind button on the receiver with a tiny screwdriver!

[Xjay98]

I tried trimming forward and it kept beeping. Went the other way and stopped on the backwards trim at 32%. Kinda odd.... But it was able to program that way.

Thanes--- thanks man but I'm using my 4pks.

[Heaving Earth]

Oh, had you mentioned that I wouldn't have made my suggestion. Of course it didn't work, you aren't using the tactic remote.
Glad you got it going

[Xjay98]

Yeah but if you hadn't mention trimming I'd still be in the garage banging my head against the wall. LOL

[Heaving Earth]

Haha well glad I could help -D

[Xjay98]

Thanks Heaving Earth!