Results 1 to 2 of 2

Thread: crazy slow turning

  1. #1
    Join Date
    Apr 2013
    Location
    OH
    Posts
    12

    Default crazy slow turning

    so I'm getting slowly annoyed with my fastech that I can carve turns to starboard (right) nice and tight with no issue but turning to port (left) is ridiculously wide. like 10x the turning radius of right. I've played with all sorts of trim settings on my controller and such but it doesn't seem to make a difference. is this just normal behavior of an offset rudder? would converting to a dual rudder setup help my issue? i just feel like if I try turning to left it swings so wide I'm borderline knocking myself out of range and I am having to "figure 8" back to the right to really turn around at the end of a run. any ideas, tips, suggestions?

  2. #2
    Join Date
    Apr 2011
    Location
    CA
    Posts
    5,666

    Default

    Ziggy,
    it is normal for the FASTech to act that way, you need to read Darin's thread which for some crazy reason I can't find it, but this will give you an idea, look carefully at post #7, that is what was recommended essentially.
    Here is another discussion:https://forums.offshoreelectrics.com/...on-right-turns

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •