whiplash 20 or IB FE30

**kevinpratt823** · 05-15-2013, 06:39 PM

I'm keeping an eye out for a Whiplash Sport 20 or Insane FE30 that won't break the bank, preferably hull/hardware, but if you have something I may be interested in lmk.

**HydroMike** · 05-18-2013, 10:42 PM

U looking for RTR ?

**kevinpratt823** · 05-18-2013, 10:53 PM

Originally Posted by HydroMike

U looking for RTR ?

Prefer hull/hardware, as I have esc, motor, etc, but I am open to check anything out.
Trying to avoid spending the money for a new complete build though.

If you have something you can email pics/details to kevinpratt823@yahoo.com

**HydroMike** · 05-19-2013, 07:52 AM

OK I have one 20 whiplash all set up minus radio

**kevinpratt823** · 05-19-2013, 08:19 AM

Originally Posted by HydroMike

OK I have one 20 whiplash all set up minus radio

Cool, lets see it. Would you also be willing to sell as hull and hardware? Price?

**HydroMike** · 05-19-2013, 08:29 AM

I like to sell all not sure on price as of yet IMG_20121027_143018.jpg IMG_20121027_143040.jpg

**Heaving Earth** · 05-19-2013, 08:39 AM

Nice whiplash, good luck on the buy Kevin

**kevinpratt823** · 05-19-2013, 08:53 AM

Originally Posted by HydroMike

I like to sell all not sure on price as of yet IMG_20121027_143018.jpg IMG_20121027_143040.jpg

Let me know when you figure it out, and what is in it for esc/servo etc.

**HydroMike** · 05-19-2013, 09:10 AM

Its the UL1 motor and AC ESC, speed master hardware, blazer turn fin,2- 2S hyperion 45C 5000 mha batteries with 5.5 bullets

**kevinpratt823** · 05-19-2013, 09:19 AM

Originally Posted by HydroMike

Its the UL1 motor and AC ESC, speed master hardware, blazer turn fin,2- 2S hyperion 45C 5000 mha batteries with 5.5 bullets

LMK when you decide your price, and which servo is in it. I really don't need the motor, esc, servo, or batts, but I will entertain it as a whole package if the price is right. Otherwise if you decide you're willing to seperate, include the price for hull and hardware. Thanx.

**ray schrauwen** · 05-20-2013, 09:58 AM

I may have a Whip 20 for sale to USA from Canada. Shipping is a bear but, it's nice. All speedmaster hardware with Virginai craftsman 7075 turn fin, 3.16" cable. Built very strong, very flat. Painted in orange Dodge dealership. It has a couple dings but, only ran about 4 times because no one runs P-sport Hydro up here...
All built with MAAS epoxy and sponsons are fortified with chopped glass & carbon fiber. Sponsons modified by 1/8" thick ply on bottom and inside tunnel. Pics available for serious interest only. I have a box to build for shipping but, I'm only going to do it if it's a go; I'm in no rush.

**kevinpratt823** · 05-20-2013, 11:26 AM

Originally Posted by ray schrauwen

I may have a Whip 20 for sale to USA from Canada. Shipping is a bear but, it's nice. All speedmaster hardware with Virginai craftsman 7075 turn fin, 3.16" cable. Built very strong, very flat. Painted in orange Dodge dealership. It has a couple dings but, only ran about 4 times because no one runs P-sport Hydro up here...
All built with MAAS epoxy and sponsons are fortified with chopped glass & carbon fiber. Sponsons modified by 1/8" thick ply on bottom and inside tunnel. Pics available for serious interest only. I have a box to build for shipping but, I'm only going to do it if it's a go; I'm in no rush.

Please do email me with pics and a price, I am def interested.
Sent from my SCH-I535 using Tapatalk 2

**kevinpratt823** · 05-23-2013, 05:43 AM

Haven't heard back on these, still looking......

Sent from my SCH-I535 using Tapatalk 2

**b0atnutz3** · 06-04-2013, 09:22 AM

What ever happen to this request did anyone follow thru with pricing or pictures??

**ray schrauwen** · 06-04-2013, 10:20 AM

I am trying... I've been hit with a lot of adversity lately. Kevin was the first one interested in my Whip20 and I'll start by posting build pic's later on I can do some fresh pic's of it close up and in the light. I got side tracked lat night and I have an odd shift of 2pm to 8pm.

I'm back on track right now so hopefully I can get'r done today to see if it appeals to you. I have a box that I will create fro shipping. It will take me a few days to build it though and if it ever comes down to a sale, no pay until it's packed and ready to ship.

It was built with P-Sport hydro power in mind. All in MAAS epoxy with carbon kevlar re-inforcement in sponsons. The turn fin backer is carbon fiber and at least 1/4" thick... more like 3/8" thick, drilled tapped for mount bracket.

More details to follow later...

**ray schrauwen** · 06-04-2013, 10:21 AM

More pics...

**ray schrauwen** · 06-04-2013, 10:23 AM

More...

**ray schrauwen** · 06-04-2013, 10:34 AM

Some more...

The last one is a finished pic showing the turn fin. All hardware is speedmaster and the hull barely has 6 runs on it with the motor shown.

It comes with all hardware, Dubro quick switch mount and attatched Ubec set at 5VDC unless you don;t want it. The servo is staying home as it is a $100 Futaba 9206. It is a standard size 20mm x 40mm servo. The rubber boot is old and will be replaced with a new one I have lots..

It ran fine with the 1500Kv PB motor but, I was using cheap cells that swelled up in there.

It's a tad heavy for me to run in LSH but, if you spend good $$ on proper batts and run an 1800kv motor it should run fine. I think it would be best on P-sport power.

When building I put thought into the why so much carbon kevlar up front... To bring the COG forward without using lead. It runs really nice but, before you say yes, I need to get it outside for bling pics, so you can see what it looks like today in the Dodge orange.

The price I gave you in PM is solid. Talk soon, I have a plate full of things to get done before 2PM.

Sorry for the delay!

Best regards,

Ray

**kevinpratt823** · 06-04-2013, 11:21 AM

Looks great, I'll take it.

Sent from my SCH-I535 using Tapatalk 2

**kevinpratt823** · 06-04-2013, 12:10 PM

I have a leo 3674 and seaking 180
Do you think this would work well on 4s, maybe even 2 5000mah 4s in paralell?
Sent from my SCH-I535 using Tapatalk 2

**Heaving Earth** · 06-04-2013, 12:25 PM

Nice boat.....
We gonna hafta have a hydro race.
Next time round I'm gonna run my Titan 29. Let's run again soon man. I want to see mikes atomic barbwire too.

**HydroMike** · 06-04-2013, 09:10 PM

What turn fin u have on there ?

**ray schrauwen** · 06-09-2013, 12:35 PM

I will be starting the pack up today and i'll let you know when I'm done.

Here are a boat load of pictures taken today showing what you are getting including shots of the few dings & blemishes. Really nothing major, the worst is the light chip on the sponson tip. New boot for steering rod installed and I swapped out the 5v Ubec for a 6v Ubec. I need the other for the Futaba servo I have. Not the best Ubecs around but it's DP270 encased.

Lots of pics and more to come of packing and boxing. I've been pretty busy, thanks for your patience!

**ray schrauwen** · 06-09-2013, 12:36 PM

Only 22 more to go...

**ray schrauwen** · 06-09-2013, 12:38 PM

12 more

Turn fin is 7075 Aluminum by Mike Hughes I think? Been a while, brand new.

**ray schrauwen** · 06-09-2013, 12:40 PM

Getting there...

**ray schrauwen** · 06-09-2013, 12:42 PM

Lastly....

**ray schrauwen** · 06-09-2013, 12:43 PM

Oops 2 more...

**kevinpratt823** · 06-09-2013, 12:43 PM

Looks great Ray! Just send me your paypal and I'll pay as soon as I get the message.

**ray schrauwen** · 06-09-2013, 12:45 PM

I think it would do well, a 4074 or 4082 2200kv would kick it up a notch.

Originally Posted by kevinpratt823

I have a leo 3674 and seaking 180
Do you think this would work well on 4s, maybe even 2 5000mah 4s in paralell?
Sent from my SCH-I535 using Tapatalk 2

Thread: whiplash 20 or IB FE30

Thread Tools

Display

whiplash 20 or IB FE30

Bookmarks

Bookmarks

Posting Permissions