I've had this hull and most the gear to build it sitting around for too long and finally got around to getting things together.
The df41 hull will have a Neu 1527 1.5d brushless motor, swordfish 300amp speedo and run 6s with a maybe a x646/3 or what ever I decide to screw on.
I began the build by giving the interior of the hull a sand and then laid carbon / Kevlar cloth to cover as much area of the interior as I could reach. With that dry, the next day I installed the hardware, stuffing tube and made a motor mount. I spent today making up a battery tray and a servo holder and now have them installed, I'm at a "stuck point" now as I wait for the speedo to be shipped from Steve. Here's a few pic's.
Bookmarks