I been fitting a top to the bottom of a BBY Drag Hydro 1/10 scale.
My start to the build.
Uploaded with ImageShack.us
I been fitting a top to the bottom of a BBY Drag Hydro 1/10 scale.
My start to the build.
Uploaded with ImageShack.us
That looks great Randy,just fantabulous!!!! Any ideas for the motor as of yet?
Randy vs Doc ??? Thatd be a hoot! A bit of harmless intercontinental ballistic warfare coming right up... :-)
Im confused..... no...wait...mabee im not?
It will be a single something in the 35,000 to 38,000 RPM range in the end.
I would love to race him for S&G but I need to have a little bigger boat this one is 24 inches MY new 1/6 scale will do it.
Uploaded with ImageShack.us
I am continuing builds on this hull this one will be a twin motor ESC, batteries and left and right.
IMG_1128.jpgprops.
These twins should be fairly radical and allow large 42 MM props. I built the hull out of 5.6 oz. Carbon fiber and 10 oz. Fiberglass the deck is 14 oz. roving. and the cowl is just 5.6 oz. CF. This will be a real strong and ridgid boat.
110hydro.jpg
Last edited by RandyatBBY; 03-25-2020 at 03:51 PM.
Bookmarks