Im trying to fit this SV27 setup on an old Force22 hull(ABS plastic).The hull is setup with 3/16" stuffing tube in order to run a .98 flex with Teflon tubing and the stuffing tube is really very well epoxied into the hull so removing it would probably crack/break the hull.The SV27 is built to run its 1/4" stuffing tube all the way thru the stinger,something I didn't know until now.My idea is/was to "just" run a .130 flex thru the 3/16" stuffing tube.
So can I just run the .130 on the 3/16" till the transom end,and then fit the stinger with 1/4" tubing in order to fit the bushing?...would it work?....I don't think so but has to ask here for opinions....thanks.