Ok that help,
Then these hammers that Billy found should be close to what you had, Right ?
You will just need a spacer for the shaft for them to work on yours.
http://www3.towerhobbies.com/cgi-bin...?&I=LXMNN0&P=7
And the one 1/4 x 30mm that Dangerous Toys has.
Other than pitch which we do not know,
Hey Billy,
How much you want for it ?
You can pm me info.
PM Replied
? WHAT RULES?
Tommy Levescy sponsored by: RCJuice.com, Rawspeed, Scorpion Precision Performance, TC Racing, Triton RC, Oxidean Marine and Cencal Hobbies.
Current Namba 1mile record holder: Pltd sport hydro 1:19:72 P-sport hydro 1:14:31
Tommy Levescy sponsored by: RCJuice.com, Rawspeed, Scorpion Precision Performance, TC Racing, Triton RC, Oxidean Marine and Cencal Hobbies.
Current Namba 1mile record holder: Pltd sport hydro 1:19:72 P-sport hydro 1:14:31
Hey Tom,
I just thought of something, Octura has several inexpensive small plastic props, all are for 1/8" shafts so there plug'n'play...
Here's links to detailed info, I've bought stuff from these guys before, they're straight shooters, but you can always check your LHS.
x431... http://www.funrcboats.com/ProductInf...uctid=OCX431PL - this would be a nice one to try out with your setup.
x432 (this one is metal, will need prep & balancing) ... http://www.funrcboats.com/ProductInf...oductid=OCX432
y534... http://www.funrcboats.com/ProductInf...uctid=OCY534PL --- The 5 part means it's 1.5 pitch, but I have no clue what the "Y" part means, maybe lenny or one of the other talented gents on this board can shed some light on that.
BB
Hey Dangerous - THANK YOU for the update
I've been dying to know that for a long time but was afraid of getting ridiculed so I never asked.
Back to the prop... would the xtra 10% pitch make a y534 something like a x634 or similar ??
What would be the benefit(s) of running a "y" prop over an "x" prop ??
Thanks in advance for your help.
Bruce
Here is a prop chart so you can do some comparisons.............http://www.offshoreelectrics.com/propeller-chart.php
? WHAT RULES?
Thanks
And here's one for you to check out... http://www.funrcboats.com/prop_chart1.htm#Chart --
Bruce
That one is a good one too. These charts basically are for FE or Nitro. I run gas and still havent found a prop chart for the big props. You know of one?
? WHAT RULES?
http://www.fastelectrics.com/octuraprops.htm#The
here is another site with good info
When you know it all.......you never will learn anything new
Tom,
I got the MM prop sent off bout 1:30pm this afternoon, clerk at the PO said you should have it in a couple 3 days, it's in a very small padded envelope.
Last edited by Billy Barnacle; 02-24-2013 at 03:01 AM. Reason: Add Pix
Bookmarks