Page 2 of 2 FirstFirst 12
Results 31 to 41 of 41

Thread: Brand New Mini Mono ESC Questions. 2013

  1. #31
    Join Date
    Nov 2012
    Location
    MT
    Posts
    151

    Default

    Mines are 3/4 inches wider than stock strim, and don't know how long they should be.....
    I will cut them tomorrow, to your same lenght, and then cut small pieces after the tests. Hope to do test this weekend.
    I am using aluminum 1mm thickness, alloy 3105, temper H26. Good alloy for forming.
    I will keep posting!
    ImageUploadedByTapatalk HD1362614408.640286.jpg

    Sent from my iPad using Tapatalk HD

  2. #32
    Join Date
    Nov 2012
    Location
    MT
    Posts
    151

    Default

    Quote Originally Posted by czegard View Post
    Mines are 3/4 inches wider than stock strim, and don't know how long they should be.....
    I will cut them tomorrow, to your same lenght, and then cut small pieces after the tests. Hope to do test this weekend.
    I am using aluminum 1mm thickness, alloy 3105, temper H26. Good alloy for forming.
    I will keep posting!
    ImageUploadedByTapatalk HD1362614408.640286.jpg

    Sent from my iPad using Tapatalk HD



    Sent from my iPad using Tapatalk HD

  3. #33
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,289

    Default

    1 3/8" wide x 3/4" to 1" long tops for that hull.
    Just a little over kill on those big ones you made.
    ? ONLY IF THEY WORK

    My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

  4. #34
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,289

    Default

    So where are the inside shots of the Mystic ?

    Quote Originally Posted by Garrett View Post
    Inside of the mystic as requested.

    Sent from my C771 using Tapatalk 2
    ? ONLY IF THEY WORK

    My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

  5. #35
    Join Date
    Mar 2012
    Location
    FL
    Posts
    126

    Default

    I added a secondary rudder, burnt my OEM ESC, so I installed the Sea king 180A, the additional rudder I used as the cooling for the ESC, and the other cools the motor. I installed a water outlet on the left side of the hull, opposing the right side. I've also added an auto bailer to each hull or sponson, I'm getting about 50 mph and 30 minute run times. Not at full throttle the whole time. Also I'm running twin 11.1v Lipo batteries, at 20C. The trailer is also from Trailcom, SSDunlimited.com

    Sent from my C771 using Tapatalk 2
    Attached Images Attached Images

  6. #36
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,289

    Default

    That is nice run time,
    The c rate I would go to 30 c at least for boats and the higher you go the more power you will have.
    Also the setup will run a lot cooler to.
    Ok on you cooling to the motor,
    You should have the in line at the lowest nipple so it fill the jacket to the top nipple and exits out,
    It will take more water to fill it that way be for it come out the nipple.
    Also will cool the can 25% more.
    Last edited by lenny; 03-06-2013 at 10:52 PM.
    ? ONLY IF THEY WORK

    My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

  7. #37
    Join Date
    Dec 2011
    Location
    OR
    Posts
    66

    Default

    Quote Originally Posted by Garrett View Post
    The trailer is custom from Trailcom. SSDUnlimited.com


    Sent from my C771 using Tapatalk 2

    Garrett
    I found trailcom / SSDUnlimited.com on the net recently, how much $$ did they charge you for the trailer??

  8. #38
    Join Date
    Mar 2012
    Location
    FL
    Posts
    126

    Default

    My mystic trailer was $225. My airboat trailer was $185, and the mini mono trailer was about $100. They've all been powder coated. And the Spartan trailer I bought for a friend was $225.

    Sent from my C771 using Tapatalk 2

  9. #39
    Join Date
    Nov 2012
    Location
    MT
    Posts
    151

    Default

    Garret,
    Just finished my trims.
    I will try test now.
    uploadfromtaptalk1362781701046.jpg

    Sent from my GT-N7000 using Tapatalk 2

  10. #40
    Join Date
    Mar 2012
    Location
    FL
    Posts
    126

    Default

    They look great. I was testing mine this evening and the motor mounts broke loose. Gotta re-epoxy the brackets down.

    Sent from my C771 using Tapatalk 2

  11. #41
    Join Date
    Dec 2011
    Location
    OR
    Posts
    66

    Default

    Quote Originally Posted by Garrett View Post
    My mystic trailer was $225. My airboat trailer was $185, and the mini mono trailer was about $100. They've all been powder coated. And the Spartan trailer I bought for a friend was $225.

    Sent from my C771 using Tapatalk 2
    Thank You for the info, the trailers I've found so far (pre-built) were in the $200~$250 range. So those price's are quite reasonable, especially considering they're built to order.

    BB

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •