lonewolfs custom hardware for sale

[lonewolf]

For starters I have been making hardware for boaters here for quite a few yrs now tho now coming back after a short break Here's what i have pics of at the moment.
A is a stinger great for a mid sized mono (tho if interested could get a second one for cat guys...This is a low profile stinger that uses a 3/16 propshaft...The measurements are in standard. This drive will include mounting hardware and two shaft bushings. I flare my bushings to help prevent bushing slide up the cable...All of my hardware is made from 6061 aluminum. This drive is also has adjustable up and down angle of about 10 deg each way. Asking price is 45$ shipped

2012-12-10_10-14-40_36.jpg2012-12-10_10-14-56_225.jpg2012-12-10_10-15-51_466.jpg2012-12-10_10-16-57_556.jpg2012-12-10_10-16-32_983.jpg
B is a also a 3/16 drive for monos upto about 35 inches. This drive will also include two bushing and mounting hardware also adjustable in angle . asking 45$ shipped

If anyone needs more info or pics plz let me know ill be happy to fill you in on needed details..Either reply here or by p/m.
If anyone needs matching rudders for these drives I can take care of that also...Thanks guys happy boating

I should make this known that this will be an ongoing event so if anyone has any ideas or needs something special of different for your build ill do my best to satisfy your needs. !!! I have helped out quite a few builds along the way so if something comes.to mind feel free to drop me a pm.
I hope to vet this moved to the services forum to continue this work! !! Thanks guys!!!

[lonewolf]

Hey boater I plan on makeing this an ongoing sale. If anyone has any ideas for their. Building I would be happy to hear them. Or if you want or need something that isn't.offered by other vendors I would be happy to hear from you to discuss your needs. Thanks. Lonewolf

[Meniscus]

I can personally attest to the quality lonewolf puts into all of the things he fabricates. I've hired him several times in the past and have been more than pleasantly surprised with what I received, all to my spec and accomodating design elements that are far from easy to execute. My point is not to rave about him or is services, but to offer that if you have a doubt, contact me and I'll be happy to share my experiences with him as an independent, objective party.

[h2o 1]

Will you also be making struts and motor mounts? Hardware for riggers by any chance? Thanks

[Doug Smock]

Good looking stuff David.

[lonewolf]

2012-12-11_10-07-57_266.jpg2012-12-11_10-09-18_491.jpg2012-12-11_10-11-06_306.jpg2012-12-11_10-11-25_365.jpg2012-12-11_10-11-49_752.jpgOk here are some more of my offerings C is a 1/4 drive skegged strut Sorry I dont have a bushing for this one but will include mounting hardware this strut is adjustable for height and angle...
Next is D This is a #/16 drive stinger great for smaller monos maybe up to about 30 inches will come with 2 bushings and mounting hardware. 30$ shipped.
next is D this is a smaller rudder also great for monos up to about 30 inches and yep hardware included this will also be 30$ shipped. If anyone is interested i would sell both as a set for 50$ shipped
Next is F this a rudder for cats up to about 36 inches I should add that as this sits it is designed for a dual puush pull set up for a more scale look. hareware included. 30$ shipped. If a guy was intersted I can add a second drive like the one pictured in A this set could would sell for 100$ shipped for the set for all three pcs. this would be a great deal seeing I sold the drives alone for 100$.

[lonewolf]

Here are the pics of the cat rudder

2012-12-12_17-25-09_597.jpg2012-12-12_17-24-41_435.jpg

[lonewolf]

Her are some pics of a current project There will be three sets of these avail when finished..I will hold off on finishing these drives so that I can fit them to the desired needs of the builder.. These drives will be for mid sized cats around 36 inches up to bout 45 tho could be cut down sone for smaller builds. These drive will be 3/16 .. these drives are made for my 42 in cat and are pictured on my build also seen in my42 in cat build thread....
These drives are desinged to be steerable tho could be made for non steerable....just a peek at this time no price has been set....
2012-12-03_17-48-09_580.jpg2012-12-03_18-21-10_907.jpg2012-12-03_18-18-33_656.jpg


And yes as asked I can makehardware for bout any style hull yes even riggers I should note that so far I havent made rudders with water pick ups... I tend to preferr the thru hull stull pick ups which I also make...However I would be willing to give them a whirl..lol. Yep for riggers and such....
And yes motor mounts ok whats left...lol Have an idea you wanna try lets talk

For you guys into trucks I also do that stuff also....I recently did a tranny mount for a scale chevy blazer, oh heck I made the whole frame from 6061 alum....could post pics of that work here but not sure if it applies to this thread maybe a mod could inform me if ok to do so...


Well happy building and boating time for me to go work on my 42 cat build....

[h2o 1]

Sweet hardware Lonewolf! sending you a pm so we can chat further. T hanks, Mark

[lonewolf]

Hey guys things been busy in my house I recently finished a set of steerable drives for a customer. and thought Id share pics I have also added some pics of the other hardware to show it in a mounted type of pic....Enjoy....

[lonewolf]

Here are the other pics of the hardware already listed these are to show relation to a hull....hope this helps out guys...
2012-12-22_14-36-11_587.jpg2012-12-22_14-36-23_190.jpg2012-12-22_15-00-18_386.jpg2012-12-22_15-01-35_760.jpg2012-12-22_15-00-39_96.jpg

[devo]

Can you give me an exact measurement Of the bolt holes/pattern on the A. Stinger in your first post. I will be using it to replace a worn out one and want to make sure I can make the bolt pattern work while not making my boat look like swiss cheese. By the way if that one doesn't work would you make me one if if gave you the bolt hole measurements I need and if so how much are we talking about? It's going on a delta force 26

[srislash]

Hey guys things been busy in my house I recently finished a set of steerable drives for a customer. and thought Id share pics I have also added some pics of the other hardware to show it in a mounted type of pic....Enjoy....

Those are looking good Lonewolf.

[lonewolf]

The holes are 1 inch on center and. 836 on center from.bottom of.drive. if need I can adjust the hole pattern or add holes to ur liking.

[srislash]

Those mount holes should be fine bud.

[lonewolf]

Sorry that response was for devo. Should have stated that...

[Mike Caruso]

Hey guys things been busy in my house I recently finished a set of steerable drives for a customer. and thought Id share pics I have also added some pics of the other hardware to show it in a mounted type of pic....Enjoy....

Lonewolf,
Very nice work, I know what it takes to make parts from material. I hope the people load you up with work my friend. And the fact that you are open to new idea's is real nice to hear!!!
Mike

[seedoobob3]

Do you have options on setback to cat push/pull rudder?

[lonewolf]

seedoobob3
I can work with options...That is what custom work is about... I rarely make more than 4 sets of anything I make...If I feel a new project has worthyness I will go thru the effort to make multiples That way I can insure more accurate work when reproducing more than one set....So Do you have a pic of ur idea... post it up up send me a pm..


Well I have been working with the drives for my customer Since last post I have come up with and idea that works real smooth and hey looks pretty good if i dont say so myelf ...lol

This will be set up as a push -pull with standard ball end links... This challenge was getting enough throw and also have clearance for moving parts...When working with twin set ups all throws and piviots must be right on the mark or set up will bind at some point and cause servo failure... ouch with 300-400 oz servo....
This setup allows for easy set up and smooth operation...and also any needed adjustment to the driveline...Upon customer approval I will update all nuts bolts and do final polish of set... This drive set will include drives 2 sets of flex bearings all mounting hardware if desired...a template for all holes needed for complete mount...and full instructions of diassasembl for any maint that may be needed and also adjusting the drives.

Awe heck heres the pics...

[srislash]

That looks saweeet,good work buddy. Nice

[lonewolf]

Glad you like now just for the finishing touches then yours when ready...

[lenny]

Do you make rudders with duel water pick ups ?
I am looking for a 1/4 skeg strut and rudder for a AeroMarine 50" pro cat gas boat.

[lonewolf]

I have done a couple smaller ones... I personally use thru hull.pick ups. I do have a 1/4 skeg strut tho no rudder attached to it. I am.willing to give it a whirl....
See above pics for the skeg strut....

[srislash]

Glad you like now just for the finishing touches then yours when ready...

So I am thinking,do you think a pair of .150 cables would suffice for this thing? I am thinking twin 1515 power'ish for a mild setup in the 47" inch light hull.Or should I go 3/16 in case of upgrade.
Oh and I can send $$$ anytime.

[lonewolf]

I have done a couple smaller ones... I personally use thru hull.pick ups. I do have a 1/4 skeg strut tho no rudder attached to it. I am.willing to give it a whirl....
See above pics for the skeg strut.... I also have a 1/4 cable. No nuts or drive dog but could work a deal to include that also...tho would need to double check on that

[lonewolf]

So I am thinking,do you think a pair of .150 cables would suffice for this thing? I am thinking twin 1515 power'ish for a mild setup in the 47" inch light hull.Or should I go 3/16 in case of upgrade.
Oh and I can send $$$ anytime.

I would go 3/16 all the way''''why take the chance 25$ cable verses motor or esc or both....

[lonewolf]

Hey guys spring is in the air time to get boats running....Well these last few weeks have been killer on me, tho I have managed to make up some motor mounts for a pr pf 4082's going into my 42 cat... I have made an order for nuts bolts and such the parts I need now are backordered a few days..hopefully early this week...As for now here are some pics of the motor mounts... As of now these are temp. tho siutable I may do a water cooled version...


heres the pics..

[Diegoboy]

Dave. I may need your outstanding services yet again. Call me when you have time to talk. It'll give me time to get the measurements as this request is still in design phase.
Thanks!!

[lonewolf]

Hey Danny hows the project going.....should say both of them that I know of but prolly more....Anywho lemme know...



Shawn Your new drives are on the way....

Bob work in progress...

[srislash]

DAVE... That is awesome work Truly great,I am sooo looking forward to implementing them.The steering turned out real smooth.
You must have a great tooling setup. Thank you so much.
Hope you made some jigs so that they can be replicated.

Boy I hope I find some time soon. Guys,don't hesitate to get Dave.
Shawn Reid