Results 1 to 30 of 30

Thread: Mugen MBX5 1/8 Electric buggy, roller.

  1. #1
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default Mugen MBX5 1/8 Electric buggy, roller.

    I have a freshly converted Mugen MBX5 buggy roller. Its ready for your electronics, comes with what you see pictured only. It has NOT been run since the new conversion from RC Product Designs was installed. I bought it like you see it, and never got around to building it. Everything appears to be well taken care of, but it is a used buggy. Shocks and diffs are very smooth.

    $150.00 shipped in the CONUS. I will ship anywhere for actual cost.

    I am also willing to trade for electric boat stuff, just depends on what you have. I run tunnels mostly (P-limited, P, and Q tunnel) but im building a Q Mono also. Need a few 6S 5000mah lipos, esc's motors etc. I could also use a few 4s 5000mah packs to. Throw it out there, ya never know.

    Paypal, cash or money order only. No checks.

    Please ask all questions here, and post offers here.

    This is on IW also.

    Thanks, ~ James

    (PS, I dont have a lot of posts on here, but have been on IW for about 14 years, am a moderator over there, and have been the IMPBA National Outboard Director for a number of years also. Im just now getting into FE.)






  2. #2
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    Ive already gotten two PM's about this. To adhere to the posted rules, and my original ad, please post all questions and offers here in this thread.

    Thanks.

  3. #3
    Join Date
    Sep 2010
    Location
    ON
    Posts
    9

    Default

    I'm interested in the buggy. Would you do $125 shipped in the CONUS? I have a Detroit mailing address.
    Wally
    Last edited by walthor; 12-02-2012 at 12:15 PM.

  4. #4
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    Hi Wally, thanks for the offer, but I cant accept that. The conversion kit alone is more than your offer, and I paid $200 for this roller about 1.5 months ago. I think the asking price of $150 shipped is more than fair, as it will probably cost around $15-20 to ship it. If you want it for the asking price, its yours. If you have FE items to offer in trade, I will be glad to listen to them.

    Thanks again for the offer.

    ~ James

  5. #5
    Join Date
    Sep 2010
    Location
    ON
    Posts
    9

    Default

    I don't have any FE parts to barter with (unless your in the market for a Turnigy marine motor or a TRex 600 motor).
    I'd like to get this as I already have a MX5 nitro so parts would be available to me.
    What is killing me on this is that I will need electronics for it and they're not easy to find..
    Wally

  6. #6
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    What Turnigy motor do you have?

    Electronic packages (ESC/motor) are available at many places. Turnigy, Castle, Tekin, etc etc all have combos for 1/8th scale buggies and truggies

  7. #7
    Join Date
    Sep 2010
    Location
    ON
    Posts
    9

    Default

    I have a Turnigy BL3656-2700 with the integrated water jacket. I also have an LRK 350/14/9 outrunner.
    Wally

  8. #8
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    Yeah, dont have much need for either one of those.

  9. #9
    Join Date
    Jun 2011
    Location
    Tx
    Posts
    182

    Default

    Any interest in a os .21 outboard converted to electric?

  10. #10
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    OS lower unit with a brushless motor? What motor? Got a picture?

  11. #11
    Join Date
    Jun 2011
    Location
    Tx
    Posts
    182

    Default

    PYea let me get home and ill send some

  12. #12
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    Sounds good, im interested.

  13. #13
    Join Date
    Jun 2011
    Location
    Tx
    Posts
    182

    Default

    I'm not able to post pics for some reason, can I email them to you? There's no motor, just the lower unit and coversion kit...

  14. #14
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

  15. #15
    Join Date
    Jun 2011
    Location
    Tx
    Posts
    182

    Default

    Did you get the pics?

  16. #16
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    No, I not gotten an email. I just double checked, not in the spam box either....

  17. #17
    Join Date
    Jun 2011
    Location
    Tx
    Posts
    182

    Default

    Ok I'll resend them

  18. #18
    Join Date
    Jun 2011
    Location
    Tx
    Posts
    182

    Default

    My only concern is I don't see any type of steering servo mount....

  19. #19
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    There is no servo mount. Only what you see pictured.

    Speedfreak_86 and I couldnt quite come to a deal, so the buggy is still for sale or trade. Somebody wants this thing..

    ~ James

  20. #20
    Join Date
    Sep 2012
    Location
    ga
    Posts
    43

    Default

    Whatcha lookin to trade

  21. #21
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    Mentioned a few items in the posts above, pretty much anything that strikes my fancy. If you are local to Atlanta (Decatur), you can come take a look at it if you're interested. Let me know what you have to offer.

  22. #22
    Join Date
    Apr 2007
    Location
    on
    Posts
    1,921

    Default

    would you trade for my NEU as you see in this thread
    its a 1515 1Ds its meant for 2s power so hi perf N2 boats, great for riggers and hydros.
    https://forums.offshoreelectrics.com/...3-NEU-1515-1Ds
    EYEKANDYGRAPHICS

    www.rclipos.com

  23. #23
    Join Date
    Apr 2007
    Location
    on
    Posts
    1,921

    Default

    is this thread still active?
    EYEKANDYGRAPHICS

    www.rclipos.com

  24. #24
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    Thanks for the offer, sorry for the late reply. I have nothing that runs anything less than 4s, so I cant really use it honestly.

    Thanks, James

  25. #25
    Join Date
    Sep 2007
    Location
    Co
    Posts
    3,847

    Default

    Interested I could set you up with some Hardware for your mono.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  26. #26
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    Hi Randy, that could work. I am building a Seaducer for Q mono, and already have the strut, rudder, flex etc. I still need a motor mount (was planning to run a Leopard 4082, but dont have it yet), flex coupler for 3/16" shaft, 6s 5000mah lipos, and a few other odds and ends that I probably cant remember. What all do you have along those lines?

    ~ James (PS, I bought one of my first Hydros from you about 15 years ago....:) )

  27. #27
    Join Date
    Sep 2007
    Location
    Co
    Posts
    3,847

    Default

    Quote Originally Posted by topfuel443 View Post
    Hi Randy, that could work. I am building a Seaducer for Q mono, and already have the strut, rudder, flex etc. I still need a motor mount (was planning to run a Leopard 4082, but dont have it yet), flex coupler for 3/16" shaft, 6s 5000mah lipos, and a few other odds and ends that I probably cant remember. What all do you have along those lines?

    ~ James (PS, I bought one of my first Hydros from you about 15 years ago....:) )
    I can set you up with the hardware you do not have. Make a list and lets work it out. I can make you a cap bank if you need one too. I do not have many extra motor and SSC thought. I do have a NOS Hacker 13XL and a Fegaio 13XL but they are not that hot any more.

    I have a lot of repeat customers. I have worked hard over the years. Not that I have not made mistakes. I am human.

    Any way let me know I race cars in the winter and have wanted a 1/8 scale to race dirt Oval.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  28. #28
    Join Date
    Nov 2011
    Location
    GA
    Posts
    82

    Default

    Randy, busy weekend coming up, but I will sit down and figure it out. I will shoot you a list hopefully by Sunday or Monday at the latest.

    Thanks, James

  29. #29
    Join Date
    Apr 2020
    Location
    fl
    Posts
    1

    Default

    Can. You please sell this to me

    Sent from my SM-A102U using Tapatalk

  30. #30
    Join Date
    Apr 2007
    Location
    Ga
    Posts
    5,184

    Default

    Thread is 8 years old..
    TOY BOAT RACER
    IMPBA Dist.13 Director
    IMPBA National Records Director 2009-2019
    IMPBA 19887CD
    NAMBA 1169

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •