1) Looks crude, but it works.
I pulled the jumbo LED from the HK low voltage sensor and wired it into the top front of the cowls. This way we could set them at a level where we would have enough time to see the light go off and keep the batteries at the 80% rate.
Silicone to seal it up.
A strip of velcro in the hull between the batts is where it sits, and one piece in the cowl when separating the top from the bottom.

IMG_0879.jpg



2) Didn't want the boats in the way, so here is how we hang them from the wall.

IMG_0881.JPG

IMG_0882.JPG

IMG_0883.JPG