Results 1 to 8 of 8

Thread: prop help

  1. #1
    Join Date
    May 2011
    Location
    AL
    Posts
    117

    Default prop help

    I have a KOS P1 with a venom 2000 kv outrunner with a 120 amp seaking esc. I'm running a single 4 cell battery and was looking to upgrade to a 3 blade prop. Any help thanks.

  2. #2
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,288

    Default

    Hi
    I am running a x440/3 with the stock 2000kv motor and stock 60a esc or Seaking 60a esc,
    But I modded the setup inside and made the rudder off set to.
    I was doing some testing on this boat, And some modding.
    Hears a link.
    https://forums.offshoreelectrics.com/...-offset-rudder

  3. #3
    Join Date
    Jan 2012
    Location
    NJ
    Posts
    605

    Default

    I run a x640 prop on mine

  4. #4
    Join Date
    May 2011
    Location
    AL
    Posts
    117

    Default

    Do I need an adapter for running 3/16 props on this boat?

  5. #5
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,288

    Default

    Yes,
    Ose has them.
    Or up grade the stock flex shaft to a .187 3/16 shaft and coupler,
    That is what I have in mine.

  6. #6
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,288

  7. #7
    Join Date
    May 2011
    Location
    AL
    Posts
    117

    Default

    Thanks! What parts will I need to convert to a flex cable for 3/16 props?

  8. #8
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,288

    Default

    Get a 187 flex cable and remove the liner so it fits well and you will need to gut the stinger for a new bushing to,
    The Hughey.187" cable and Etti 5mm/.187" collet would be less troublesome and very dependable,
    Also will need a bushing for the stinger and a prop dog and prop nut.
    Check Ose on hear or swap shop or post a WTB,
    Do a search or may be rcraceboat.com or kintecracing.com

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •