Working on another one...
41'' Fantasm
FC 3-16s 300A Twin ESC
Twin Sirius 1717 / 1580kv Motors
6-8s SAW
Joel Mertz
"Double Tap" Twin Screw 41'' Fantasm
Working on another one...
41'' Fantasm
FC 3-16s 300A Twin ESC
Twin Sirius 1717 / 1580kv Motors
6-8s SAW
Last edited by Rocstar; 02-28-2013 at 10:47 AM. Reason: Photos
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Senior Member
Nice! I absolutely love my Fantasm. Mine is a LV setup but still does 65-70 MPh on 5S. Great handling boats also!
Joel Mertz
Carbon Fiber Installed...
Last edited by Rocstar; 02-28-2013 at 10:48 AM. Reason: Pic Links
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Joel Mertz
Stingers Installed with CF backing plates.....
Last edited by Rocstar; 02-28-2013 at 10:49 AM. Reason: pic links
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Joel Mertz
Why...so...Sirius...? 1717/1580kv
It may not look like it, but it's a tight fit and I don't have the jackets yet....
Last edited by Rocstar; 02-28-2013 at 10:49 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Senior Member
Wow I would have thought there would be a bit more room than that. Will be interesting setting up the stuffing tubes. Looking good so far!
Fast Electric Addict!
Nice, where did you get the motors?
Joel Mertz
Keith BradleyOriginally Posted by Cooper
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Joel Mertz
It's going to be tricky, I won't be able to put much angle on the motor.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
FE Rules!
You think you can get them in there with the jackets on????? Bit late now but twin 4092's would have been much easier and just as powerful. If it doesnt fit you can sell those easily and get some 4092's.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:https://forums.offshoreelectrics.com/...est!&highlight=
Senior Member
Mine has TP 4092's and they fit great.
Joel Mertz
It's a Biggin...
Last edited by Rocstar; 02-28-2013 at 10:49 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
FE Rules!
Hopefully yours wont blow up 5 seconds into your run and scorch the inside of your boat......................
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
Joel Mertz
Where's the optimism? Can't you hope for at least 45 seconds.....give me a chance to get on plane...
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Joel Mertz
Rudder mounted with 4 layers of carbon fiber cloth laid up inside the transom....
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
FE Rules!
I'm a fan of big, long rudders with dual pickups
I get rudders longer than usual, and if they dont work out, then I lop some off, you cant add!! I've only cut two down so far out of 20+ boats, i like 'em long, great control that way in my opinion. I race my Pursuit so its just average length where you need all the help you can get.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
Fast Electric Addict!
FE Rules!
OK, fill me in...........I beg to differ sir...
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
Senior Member
Im diggin the dual pickups. Very nice
Fast Electric Addict!
Just busting your chops.
I've made them longer before just by TIG welding aluminum bar to them and then finishing them off to the correct shap/size. I realize most people don't have the ability to do that though. Cutting them off is far easier!
Joel Mertz
Installed some hatch bolts...
Last edited by Rocstar; 02-28-2013 at 10:51 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Joel Mertz
ESC Mount...
Last edited by Rocstar; 02-28-2013 at 10:52 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Joel Mertz
Shoehorned in...
Last edited by Rocstar; 02-28-2013 at 10:52 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Fast Electric Addict!
Looks good so far. Im watching and keeping notes as im planning similar build over winter. Might go cf hull but same motor setup. When you run those on 8s what are you realistically trying for top speed?
FE Rules!
Looks good...........................you may have a 70 mph boat on your hands.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
Joel Mertz
Motor mounts and tubes in...
Simple paint. Nothing special..
Last edited by Rocstar; 02-28-2013 at 10:54 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Joel Mertz
Ready for testing...
Last edited by Rocstar; 02-28-2013 at 11:01 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Not there yet
That controller looks so good in there I may have to get me a Fantasm.I'm sure my 950kv TP's would do it.
Fast Electric Addict!
what props you got on there ? with two of those torque monsters in the boat you will be able to spin some hefty props... also did you run the bolts for holding down the ESC thru the tunnel ? Looks good...
Looking forward to seeing it run
Joel Mertz
I have a set of Prop Shop 4518's and 5017's, we'll see how she does...the ESC mount is bolted to another CF plate that is epoxied in place.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Posting Permissions
 |
Reply With Quote
Bookmarks