Working on another one...
41'' Fantasm
FC 3-16s 300A Twin ESC
Twin Sirius 1717 / 1580kv Motors
6-8s SAW
Working on another one...
41'' Fantasm
FC 3-16s 300A Twin ESC
Twin Sirius 1717 / 1580kv Motors
6-8s SAW
Last edited by Rocstar; 02-28-2013 at 10:47 AM. Reason: Photos
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Nice! I absolutely love my Fantasm. Mine is a LV setup but still does 65-70 MPh on 5S. Great handling boats also!
Carbon Fiber Installed...
Last edited by Rocstar; 02-28-2013 at 10:48 AM. Reason: Pic Links
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Stingers Installed with CF backing plates.....
Last edited by Rocstar; 02-28-2013 at 10:49 AM. Reason: pic links
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Why...so...Sirius...? 1717/1580kv
It may not look like it, but it's a tight fit and I don't have the jackets yet....
Last edited by Rocstar; 02-28-2013 at 10:49 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Wow I would have thought there would be a bit more room than that. Will be interesting setting up the stuffing tubes. Looking good so far!
Nice, where did you get the motors?
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
You think you can get them in there with the jackets on????? Bit late now but twin 4092's would have been much easier and just as powerful. If it doesnt fit you can sell those easily and get some 4092's.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
Mine has TP 4092's and they fit great.
It's a Biggin...
Last edited by Rocstar; 02-28-2013 at 10:49 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Hopefully yours wont blow up 5 seconds into your run and scorch the inside of your boat......................
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
Rudder mounted with 4 layers of carbon fiber cloth laid up inside the transom....
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
I'm a fan of big, long rudders with dual pickups
I get rudders longer than usual, and if they dont work out, then I lop some off, you cant add!! I've only cut two down so far out of 20+ boats, i like 'em long, great control that way in my opinion. I race my Pursuit so its just average length where you need all the help you can get.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
Im diggin the dual pickups. Very nice
Installed some hatch bolts...
Last edited by Rocstar; 02-28-2013 at 10:51 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
ESC Mount...
Last edited by Rocstar; 02-28-2013 at 10:52 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Shoehorned in...
Last edited by Rocstar; 02-28-2013 at 10:52 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Looks good so far. Im watching and keeping notes as im planning similar build over winter. Might go cf hull but same motor setup. When you run those on 8s what are you realistically trying for top speed?
Looks good...........................you may have a 70 mph boat on your hands.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
Motor mounts and tubes in...
Simple paint. Nothing special..
Last edited by Rocstar; 02-28-2013 at 10:54 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Ready for testing...
Last edited by Rocstar; 02-28-2013 at 11:01 AM.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
That controller looks so good in there I may have to get me a Fantasm.I'm sure my 950kv TP's would do it.
what props you got on there ? with two of those torque monsters in the boat you will be able to spin some hefty props... also did you run the bolts for holding down the ESC thru the tunnel ? Looks good... and the dual pickup rudder is the way to go as far as I'm concerned. I've yet to see in hull pickups spray out water like these do.
Looking forward to seeing it run
I have a set of Prop Shop 4518's and 5017's, we'll see how she does...the ESC mount is bolted to another CF plate that is epoxied in place.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Bookmarks