Pursuit Mono kits.

[Steven Vaccaro]

These are prebuilt Pursuit Mono kits. 32" long.

Includes Leopard 4082 2200kv motor and hobby wing 180 esc with extra caps added.
Water cooled motor mount, motor and speed control.
3/16" prop shaft with .187(3/16") cable.
We have white or yellow hulls with stickers.

These are the best hulls and components on the market in this price range. Unlike other almost ready to runs, this boat will NOT need a new esc and motor to be fast.

requires:
2 channel radio with 1 standard size servo.
(1) 4s 65c 5000mah lipo pack.

They are $425 plus shipping. Beware there are others hulls on the market that look like this for less money, but they come with a cheap motor and esc. Which will need replacing after a run or two after they burn up.

I also have drop in replacement 1 piece cables. They come with the drive dog set, bullet nut and end soldered. $34.95.

Payment by Paypal Only.

2 Yellow In Stock
1 White in Stock

[ray schrauwen]

Very nice Steve! Great price too!

[Cooper]

I have one of these and they are excellent. You really can't put something like this together for ose price. Great handeling hull, turns on a dime. The only thing I changed was the water jacket. This might be one of the best rtr and excellent for someone just getting into fe. Just buy one:)

[Steven Vaccaro]

These 4 are the last ones at this price. Next batch is 475. Due to the very high cost to get them here.

Sent from my DROID RAZR using Tapatalk 2

[rabosi]

I have the previous ose version with the 4074 and it does over 50mph on 4s with M445 prop. Great boat and very reliable.

[Brushless55]

these would make great PMono racers

[ruffdawg]

I was in on the other thread and waiting for these, I would like a white one with the 1 piece flex shaft shipped to Vic Adleman-11004 Sunfield dr-Midlothian Va 23112... My paypal is wwwgzc1@gmail.com...Please send me a request for funds for the total + shipping and please dont forget to include the xtra cost for the 1 piece flex cable.. thanks Vic

[Steven Vaccaro]

I was in on the other thread and waiting for these, I would like a white one with the 1 piece flex shaft shipped to Vic Adleman-11004 Sunfield dr-Midlothian Va 23112... My paypal is wwwgzc1@gmail.com...Please send me a request for funds for the total + shipping and please dont forget to include the xtra cost for the 1 piece flex cable.. thanks Vic

Request sent for a boat, extra upgrade cable and shipping.

[ruffdawg]

THANK YOU SO MUCH,PAYMENT SENT , what would you recommend for really nice batteries for this... i run the venom 4c hardpacks in my 1/8 scale dirt oval late model cars but they are 35c-70c burst 5000 mah ? will they work or do i need a constant 65c and if so what would you recommend...Also i need an xtra prop ? the last one i bought from you guys for my UL - 1 came sharpened and balanced and it was fantastic, what props on it and what would you recommend for a second 1... I am willing to give up a little top speed to have more controll in the chop and hard pull thru the corners... Thanks from a new guy ....Vic

[Steven Vaccaro]

id start with the stock prop and go from there.

I wouldnt use 35c packs. this setup is going to draw more than they can handle.

I thing I suggest when you get it, check and tighten all the screws. Any wood structure should have some shoe goo or similar added to it. IE, the battery tray.

[ruffdawg]

Thanks for all your help with this info, i will go over screws- fasteners etc when it arrives and i have plenty of the marine goop from the gas boats, probably going to go with the new hitek- 1/10 high torque servo, but only batteries im finding are the gens ace 4s 60-120c what would you suggest for batteries, im going to buy a couple new ones for this...thanks Vic

[gfm1135]

Steve, are you still offering this package?

[Steven Vaccaro]

yes

[gfm1135]

Steven, do you have a yellow one left? If so, I'll take it.

[Steven Vaccaro]

Yes I have yellow. Pm me your PayPal I'd.

Sent from my DROID RAZR using Tapatalk 2

[driftah]

what is left and how much?

[Steven Vaccaro]

1 yellow, 2 white $425 each

[driftah]

how much shipped to canada,L9c2v5 postal code please

[Steven Vaccaro]

Expressmail with tracking and insurance is about $70 or so.

[driftah]

are the pics at top of this post what we get exactly? or is there newer layout

[Steven Vaccaro]

the pictures in post 1 of the enterior and outside stinker pictures are the boats in this batch. the hardware picture is of the old batch and still the same.

[Revolt30]

1 yellow, 2 white $425 each

Interested in a white one.What is the speed and would you ship to Canada?

[Steven Vaccaro]

Expressmail with tracking and insurance is about $70 or so.

About 45mph or so on 4s.

[atechbh]

Can I run it on 6s and how fast?

[Steven Vaccaro]

no, it will not run on 6s

[dmilkey-2012]

Steve any pursuits left at $425.00? Thanks doug

[Steven Vaccaro]

Steve any pursuits left at $425.00? Thanks doug

I'm just in the middle of moving. I'm pretty sure I have yellow. Send me an email if you want more info and I can check on Tuesday. Steven at offshoreelectrics. Com

[dmilkey-2012]

Steve thanks for the reply.. Do you have an office tel # i can call you at and if so whats your hours. Doug

[Steven Vaccaro]

Im not always there, for the fastest response please email me.

[dmilkey-2012]

I'm still interested in the yellow pursuit if you still have one. Also would be interested in the drop in cable 34.95... Hoe much for shipping to chelsea -- Mich. 48118? Thanks Doug