Just been setting up my recovery boat with 28mm KMB Jet drive with reversing bucket
.had to make a adapter plate for the motor , motor is 4 pole 2880kv vented can / esc 60amp turnigy ,
i made that rear support from alloy sheet,for defuser to screw to . i shall add a skid /trim plate under it , lol its going to be a rocket on 3s2p 1800mah .0r 2s2p 2200mah ,hehe
still i bit of messing around and half of tube of shoe goo to go ,
IMAG0481.JPGIMAG0485.JPGIMAG0477.JPGIMAG0483.JPG
Bookmarks