Hi Guys, im from Austria, my 1st Thread.
I Ordered a Zonda Cat from Horracing.
41" catamaran ARTR twin drive set. Boat hull made up carbon fiber epoxy.
Recommended for use of 3s Li-Po batteries (not included). (dont understand why they recommended 3s for such a nice cat )
Specification:
Length: 41" or 1050mm (excludes rudder and strut)
Width: 11 3/4" or 300mm
Motor: 2 unit x water cooled 2075KV 3674 brush-less in-runner with motor mount
Drive system: stainless steel collets, 3/16" flexi cable, brass tube, teflon lining, teflon washers, machine billet propeller, prop nut, drive dog (installed) Other accessories: antenna mount, water tubings, rudder, stinger drive
Parts NOT included: Batteries (11.1V 2100-4500mah) and chargers, radio system, boat stand, electronic speed controllers (ESC), servos.
Here a Link from the Page and the Boat informations: http://www.horracing.com/product_inf...roducts_id=566
Now i got some Questions, maybe someone know it, because i already wait 5 days for a answer of horracing.
I have no idea what size the Propellers are........someone know that Wich Size i shoud run on 5s with this Motor and 200ams Esc´s, never drive a Cat before.
The 2 Motors with it, are they ok? (Motor: 2 unit x water cooled 2075KV 3674 brush-less in-runner with motor mount )
I Ordered from OSE 2x swordfish 200amps Plus esc, 2x 5000Mah 5s Lipos (50/100c) (1 Lipo for Each motor and esc) and 5,5mm Gold Connections.
My other Setup i already got: Traxxas Radio and receivar with waterproofed Receiver box, Traxxas 2056 Servo, Lipo charger. (My Spartan lost the Flexcable with 53 Mp/h and gets water, sinks, and the Seaking 180a burned everything down)
The Servo and Receivar i need to mount myselv into the Boat, how i need to mount the Servo? i need a Servo Mount on the Plate in that i can pull the Servo or it works without?
I want a Topspeed Build with this Hardware and Items i ordered, how i need to program the Esc? 1 Esc with Bec and the other without or what? Did i need Capacitor banks?
Sorry for my english, its very bad i know
Every Answer on one of this Questions help me sleeping better heheheh
here some pics of it:
41catch3a.jpgzondafgartr1.jpgzondafgartr2.jpgzondafgartr3.jpgzondafgartr4.jpg
On some pictures you see Kevlar, but its the normal, the build is the same, got the pictures of horracing´s homepage.
Bookmarks