Results 1 to 4 of 4

Thread: My P1 35" sub floor came completely unglued from the hull.

  1. #1
    Join Date
    Sep 2011
    Location
    MI
    Posts
    1

    Default My P1 35" sub floor came completely unglued from the hull.

    My boat is 11months old....no accidents and my sub floor came completely unglued. Any suggestions for fixing? glue types?

  2. #2
    Join Date
    Nov 2010
    Location
    NY
    Posts
    214

    Default

    Epoxy resin. I layed an additional layer of fiberglass in my hull. If you plan on doing speeds more than 25mph you should do the same. The gel coat will crack.

  3. #3
    Join Date
    May 2012
    Location
    ca
    Posts
    38

    Default

    Quote Originally Posted by antslake View Post
    Epoxy resin. I layed an additional layer of fiberglass in my hull. If you plan on doing speeds more than 25mph you should do the same. The gel coat will crack.
    On some of the boats the wood also could use another coat of a poly resin since its quite thin. This will help keep the wood sealed.

  4. #4
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,289

    Default

    I pulled my wood out for the cells,
    To get a lower cg in the hull.
    My cells are on the floor of the hull now and it help a lot for smooth running.

    Quote Originally Posted by rjsmachz View Post
    My boat is 11months old....no accidents and my sub floor came completely unglued. Any suggestions for fixing? glue types?

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •