Page 7 of 8 FirstFirst ... 5678 LastLast
Results 181 to 210 of 211

Thread: 1/6 Scale Drag Boats

  1. #181

    Default

    Quote Originally Posted by f1rogers View Post
    Randy, could you let me know how much I owe, would like to pay you the balance on my boat, that way you will have 2 paid in full. Thanks
    I have a vacation to Moab Utah, that I am leaving for tomorrow. I will be spotting for a friend I will be back May 8. We will do it then.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  2. #182

    Default

    Haha, I've been meaning to get on here and see how Randy has faired Thru the winter.
    And of course check on the hulls,;-)

  3. #183

    Default

    Quote Originally Posted by RandyatBBY View Post
    I have a vacation to Moab Utah, that I am leaving for tomorrow. I will be spotting for a friend I will be back May 8. We will do it then.
    Very nice Randy. Just a bit jealous.

  4. #184

    Default

    Quote Originally Posted by srislash View Post
    Very nice Randy. Just a bit jealous.
    I understand, If it was not for my friend/Frank I would not get to do this. I am packing now and will be on line off and on during the trip.
    I have been stuck a little thinking out the hatch drop down. I built a part may just use it for a template. I also had 10 orders come in and hard to do everything at the same time. I have a month off from racing but that will go fast.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  5. #185

    Default

    Ok, thanks.

  6. #186

    Default

    Quote Originally Posted by RandyatBBY View Post
    I understand, If it was not for my friend/Frank I would not get to do this. I am packing now and will be on line off and on during the trip.
    I have been stuck a little thinking out the hatch drop down. I built a part may just use it for a template. I also had 10 orders come in and hard to do everything at the same time. I have a month off from racing but that will go fast.
    Excellent Randy, it is good to get away. I've been trying to get to Vancouver Island for what seems forever but I am pretty sure next weekend will be it.. YAAY!!

    Orders are always good, takes at least 'some' funds to race, hehe.

  7. #187

    Default

    Geez It has taken 6 to 7 weeks for my resin to come in. Dang spam. Any way I can do stuff as I have time.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  8. #188

    Default

    Quote Originally Posted by RandyatBBY View Post
    Geez It has taken 6 to 7 weeks for my resin to come in. Dang spam. Any way I can do stuff as I have time.
    That is all that can be expected buddy. Summer starting out good?

  9. #189

    Default

    Is there a "Projected" time frame on this hull, I check here most every day, just curious.

  10. #190

    Default

    Quote Originally Posted by f1rogers View Post
    Is there a "Projected" time frame on this hull, I check here most every day, just curious.
    I have been too busy with racing and orders to get any good time to work on it during boating season. (As allways) but there is so little left to do that this winter it will be done.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  11. #191

    Default

    Well I am getting caught up on my work and found a little time to work on the DH
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  12. #192

    Default

    Very good sir, how are you doing anyways? Hope you guys are having good weather.

  13. #193

    Default

    I am doing well I just need to do the regular stuff and I am OK. Just finishing the new bottom on the SS30 laying up one soon. It ws real hot for a while cooled off a little.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  14. #194

    Default

    This is coming along great I will be waxing this week on the deck and the sponsons are not far behind.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  15. #195

    Default


  16. #196

    Default

    First wax is on the deck mold.

    The sponson molds are waxed too.
    Last edited by RandyatBBY; 08-21-2017 at 10:06 PM.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  17. #197

    Default

    Coming along nicely

  18. #198

    Default

    Quote Originally Posted by srislash View Post
    Coming along nicely
    Days when I get to polish and apply two coats of wax are hard to find, But I try!
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  19. #199

    Default

    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  20. #200

    Default

    Ok what is this process Randy? Is that wax?

  21. #201

    Default

    Quote Originally Posted by srislash View Post
    Ok what is this process Randy? Is that wax?
    I layed up the mold, to build hull top. I have the same thing to do on the sponsons bucks. Then wax molds and build hulls.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  22. #202

    Default

    Working on making the sponson molds hear is the deck mold.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  23. #203

    Default

    So nice, love it.

  24. #204

    Default

    Quote Originally Posted by srislash View Post
    So nice, love it.
    Thanks the sponson molds were made yesterday. this is getting done becuse I did not go to the Nats in L.V.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  25. #205

    Default

    Nothing like a picture.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  26. #206

    Default

    Woot woot

  27. #207

    Default

    We are well on our way to having the first boat in about two to three weeks. We have all the molds done and are in the waxing final stages. three to 6 working days of waxing to be done.


    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  28. #208

    Default

    Oh my, getting exciting Randy. I’m contemplating shooting you some funds to up mine to CF. Thoughts?

    I’m not planning on going full SAW with mine, just good laugh and look good with that motor all sparkly.

  29. #209

    Default

    Quote Originally Posted by srislash View Post
    Oh my, getting exciting Randy. I’m contemplating shooting you some funds to up mine to CF. Thoughts?

    I’m not planning on going full SAW with mine, just good laugh and look good with that motor all sparkly.
    The first hull out of the molds will be FG. Molds are good quality. I do not do infusion, do not have the supplies nor the experience with the process. Oh Some day I will have to try my hand at it, it is just a pile of money to get into it. I know the way I have been doing lay ups is good and we know what we will have when the job is done.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  30. #210

    Default

    Yeah I think FG will be fine. PayPal ready for shipping buddy, haha.

Page 7 of 8 FirstFirst ... 5678 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •