Page 8 of 10 FirstFirst ... 678910 LastLast
Results 211 to 240 of 296

Thread: 1/6 Scale Drag Boats

  1. #211

    Default

    two more coats of wax and then PVA. I am going to have to figure out the attachment of the sponsons, it will be a lot like the WE.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  2. #212

    Default

    I layed up one set of sponsons and a cowl today next week the deck and hull bottom. we have progress.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  3. #213

    Default

    Quote Originally Posted by randyatbby View Post
    i layed up one set of sponsons and a cowl today next week the deck and hull bottom. We have progress.
    nice

  4. #214

    Default

    If it will get here sooner, make my boat FG

  5. #215

    Default

    I layed up the deck and bottom today

    Quote Originally Posted by f1rogers View Post
    If it will get here sooner, make my boat FG
    It does not make any difference..... time wise.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  6. #216

    Default

    The first Drag Hydro fresh out of the mold
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  7. #217

    Default

    Yayy, love it all clear’ish like that. Bit of airbrush work and good to go

  8. #218

    Default

    And look what my brother found me, claims it was off some Bigfoot toy truck. It may fit on Randy and be lighter than the one behind it


  9. #219
    Join Date
    May 2017
    Location
    OK
    Posts
    1,453

    Default

    Dang, that’s a beautiful motor! That would look awesome Shawn!

  10. #220

    Default

    Quote Originally Posted by CraigP View Post
    Dang, that’s a beautiful motor! That would look awesome Shawn!
    One of them anyway. I think Randy has sort of a block melding in there somewhere.

  11. #221

    Default

    What scale are the V8 motors and where do I get one? Looking for one for my 40" jet boat. Cheers, Steve

  12. #222

    Default

    Quote Originally Posted by srislash View Post
    One of them anyway. I think Randy has sort of a block melding in there somewhere.
    That block/deck mold was started, but not finished yet.

    I fitted the main body of the boat last week before I caught the flu. Luckily I was over my sickness by Xmas.


    Quote Originally Posted by volusia View Post
    What scale are the V8 motors and where do I get one? Looking for one for my 40" jet boat. Cheers, Steve
    1/6 scale, hear is a link to the one I am using:
    https://www.autobarn.net/liberty-840...RoCdkEQAvD_BwE
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  13. #223

    Default

    Quote Originally Posted by RandyatBBY View Post
    That block/deck mold was started, but not finished yet.

    I fitted the main body of the boat last week before I caught the flu. Luckily I was over my sickness by Xmas.



    1/6 scale, hear is a link to the one I am using:
    https://www.autobarn.net/liberty-840...RoCdkEQAvD_BwE
    Glad you got over it in time Randy. That is usually my trick, two days before the day I will catch something nasty.

  14. #224

    Default

    Thanks for the info on V8 engine, going to order one now, cheers, Steve

  15. #225

    Default

    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  16. #226

    Default

    Quote Originally Posted by RandyatBBY View Post
    The hull body fits fairly good. The sponsons are filled with foam. I am moving along on the build.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  17. #227

    Default

    Looks great Randy

  18. #228

    Default

    Actually making good progress. Goined the sponsons and tub. First one done with in a week or so.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  19. #229

    Default

    Alright Randy!!! Looking good buddy!

  20. #230

    Default

    Making progress The first Fiber glass boat is ready to trim the sponsons and fit them to the tub.

    The second Carbonfiber boat is getting layed up.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  21. #231

    Default

    Rockin’ And Rollin’ it Randy!

  22. #232

    Default

    Little warn out from laying up a boat yesterday. Sucks getting old. Cowl from last week in mold ready to pull today.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  23. #233

    Default

    A new process I have been thinking about. Is to take the wet cloth and squeegee a thin film of slurry on to the cloth to make a clean CF finish. Light and strong. No need to paint good looks and no water leakage with CF. Also close to look of infusion but much stronger. This is the result
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  24. #234

    Default

    That looks fabulous Randy. And don’t worry about getting old, it happens to the best of us. As long as you are enjoying yourself that’s all that matters.

    I actually just had this conversation Saturday with Andy. Just keep the love.

  25. #235

    Default

    Shaun this your boat waiting to have the sponsons mounted.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  26. #236

    Default

    Quote Originally Posted by RandyatBBY View Post
    Shaun this your boat waiting to have the sponsons mounted.
    Awesome

  27. #237

    Default

    Working on getting a scale scoop for the boats. I found a guy in canada to make one with a 3d printer.


    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  28. #238

    Default

    The second Boat is all most done.

    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  29. #239

    Default

    Quote Originally Posted by RandyatBBY View Post
    Working on getting a scale scoop for the boats. I found a guy in canada to make one with a 3d printer.
    Anyone I may know? On west coast?

    What are you thinking Randy, perhaps the three butterfly type bug catcher?

  30. #240

    Default

    I found this guy on facebook "Scale Design by MrcommaD". Any body know the manufacture of the scoop so we can get more scale detail?
    Yes the scoop will be the three butterfly type that sticks up in the air a long way!
    Last edited by RandyatBBY; 04-25-2018 at 01:38 PM.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

Page 8 of 10 FirstFirst ... 678910 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •