Results 1 to 12 of 12

Thread: Impulse 31 leaking water

  1. #1
    Join Date
    Jul 2012
    Location
    FL
    Posts
    6

    Default Impulse 31 leaking water

    Hi,
    I'm pretty new to the RC world. I have the Impulse 31 and took it out for the first time for about 35 mins, brought it into shore and opened it up and it had some water in the hull. I checked everything and can't figure out where it is leaking. I've heard that the top cap could leak but i've put the clear flexible tape around it so any help would be awesome.

  2. #2
    Join Date
    Jun 2012
    Location
    MA
    Posts
    1,876

    Default

    Might be leaking around the stuffing tube/wet well. Put it in the bathtub with lid off to check

  3. #3
    Join Date
    Jul 2012
    Location
    FL
    Posts
    6

    Default

    I did that and it wasn't leaking, but I also just found a soft plastic tube could that be it? If it is where does it go. What is the stuffing tube?

  4. #4
    Join Date
    Jun 2012
    Location
    MA
    Posts
    1,876

    Default

    Stuffing tube is the brass tube that your flex shaft goes thru

  5. #5
    Join Date
    Jul 2012
    Location
    FL
    Posts
    6

    Default

    do you know how i could fix that

  6. #6
    Join Date
    Jul 2012
    Location
    FL
    Posts
    6

    Default

    do you also know what that plastic tube goes to

  7. #7
    Join Date
    Jul 2012
    Location
    FL
    Posts
    6

    Default

    i'm just trying to learn little by little

  8. #8
    Join Date
    Jun 2012
    Location
    MA
    Posts
    1,876

    Default

    I dunno what's broken.
    I assume the tube you're talking about is the Teflon liner.
    You haven't diagnosed a problem, so what needs to be fixed?

  9. #9
    Join Date
    Jul 2012
    Location
    FL
    Posts
    6

    Default

    that's true, i know i have water coming in from some where, can't find where it's coming in from. where does the Teflon liner go?

  10. #10
    Join Date
    Jan 2011
    Location
    MI
    Posts
    222

    Default

    Look in the middle back of the boat. The brass tube with the liner will be just short of connecting to the motor.

    If you can show us a pick we might be able to help with the unhooked tube? If its not obvious look at the side of the boat where the water outlet is.. It may have come off? Many of us use zip ties on all our water connections to help avoid the tubes from coming off.

  11. #11
    Join Date
    Nov 2011
    Location
    Il
    Posts
    52

    Default

    The little tube you are referring to that came.with the boat goes around the battery hold down threaded shaft. I think it's supposed to protect the sides of the batteries from chafing when installed. It took me a while to figure that out since the instructions proboat gives you are minimal at best.

  12. #12
    Join Date
    Aug 2010
    Location
    wi
    Posts
    1,461

    Default

    Quote Originally Posted by BRich View Post
    Hi,
    I'm pretty new to the RC world. I have the Impulse 31 and took it out for the first time for about 35 mins, brought it into shore and opened it up and it had some water in the hull. I checked everything and can't figure out where it is leaking. I've heard that the top cap could leak but i've put the clear flexible tape around it so any help would be awesome.
    Was this ran 35 min straight?

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •